Pour Salt Down the Drain: A Special Trick with Impressive Results

6 November, 2024

Benefits of Pouring Salt Down the Drain

Dissolving Pipe Residue

Salt has the ability to dissolve pipe residue, particularly grease. When pipes are clogged, pouring half a cup of salt, along with a cup of white vinegar and a bit of baking soda, will enhance cleaning effectiveness.

Preventing the Growth of Insects

Salt can prevent the growth of drain flies and even kill them, as they often thrive in damp areas with a food source, such as in clogged pipes.

Salt dissolves pipe residue, especially grease.

Inhibiting Root Intrusion

Salt also makes drain pipes less appealing to roots, as they dislike salty environments. This helps prevent roots from intruding into the pipe system.

Softening Hard Water

Salt helps soften hard water by providing mineral ions such as calcium and magnesium, preventing the buildup of residue on surfaces.

Note: Use salt cautiously as it is corrosive. After pouring salt into the pipes, thoroughly flush them with water. Also, when using salt to soften water, avoid direct contact between salt and the water source to prevent health hazards.

Easy Drain Unblocking with Salt

Step 1: Pour Salt into the Drain

Salt works by corroding the clogging substances in the drain. Simply pour half a cup of salt down the drain without mixing it with vinegar; let the salt do its work.

Step 2: Rinse the Pipes with Boiling Water

Boil 2 liters of water and slowly pour it into the drain. Direct the water straight into the drain to avoid splashing. Continue flushing the drain with hot water from the tap.

Boil 2 liters of water and slowly pour it down the drain.

Step 3: Pour Salt Again

If the drain is still blocked after the first salt treatment, you can try again. Pour another 1/2 cup of salt into the drain and repeat the boiling water rinse. Remember not to pour too much salt at once.

Unblocking Drains with Salt and Vinegar

Step 1: Mix Salt and Vinegar

In a small bowl, mix 1 cup of salt with 1 cup of vinegar. Stir until the salt is completely dissolved. Then, add 1/2 cup of lemon juice and stir again.

Step 2: Pour the Mixture into the Drain

Remove the drain cover and pour the prepared mixture into the drain. Cover the drain again to allow the mixture to be fully absorbed. Wait for about 15-30 minutes.

Step 3: Rinse the Drain with Water

Boil 2 cups of water and slowly pour it into the drain. Ensure that the water doesn’t splash back to avoid burns. Pour slowly and direct the water into the drain, completely removing clogs and cleaning the pipes.