Ideal Temperature Setting for Refrigerator to Save Money Every Month

1. Set the ideal temperature

Most refrigerators have 5 temperature control levels. Level 5 is the coldest setting.

Experts at Beko recommend setting your refrigerator temperature from 2.2 to 3.3 degrees Celsius to achieve maximum efficiency while still saving electricity.

2. Place the refrigerator in a cool location

Your refrigerator will have to work harder if it is located near the oven or heat source. Instead, move it to a cooler area and make sure there is at least 5cm of space around the sides, back, and top for adequate ventilation.

Without proper ventilation, the refrigerator will not be able to release heat from the compressors, causing it to overheat and work harder to maintain the desired temperature.

3. Always tightly close the refrigerator door

This may seem obvious, but leaving the door open will allow cool air to escape, forcing the refrigerator to work harder to return to the set temperature.

So, instead of getting distracted while taking out food for your meal, close the door whenever possible.

4. Organize the refrigerator properly

Knowing where your food is in the refrigerator will mean less time with the door open.

This also means less food wastage as items will not get lost in the depths of the refrigerator.

According to Beko experts, “The less time you spend searching for food with the refrigerator door open, the less the condenser coils will have to work to bring the temperature back to the set level.”

5. Avoid putting hot food in the refrigerator

Putting hot food in the refrigerator will raise the internal temperature, so it’s best to avoid doing this. Instead, let the food cool down before placing it in the refrigerator.

6. Regularly care for and clean the refrigerator

Any cracks or dirty seals mean warm air can seep into your refrigerator. So, this small tip will help you save a considerable amount every month.

In addition, the condenser coils on the back of the refrigerator play a role in maintaining the cool temperature inside.

Over time, they can accumulate dust, so it’s good to clean them periodically to ensure they work efficiently.

7. Don’t overcrowd the refrigerator

It’s best to have a refrigerator that is 2/3 full. This is because a fuller refrigerator means there is less air to keep cool.

If your refrigerator is too large to fill up, you can always place a container of water inside. But don’t overcrowd or block the air vents because you still need good airflow to keep the entire refrigerator cool.

These are 7 ways to help you save energy and reduce costs when using a refrigerator. Give them a try!

According to Tổ quốc