Seal the food before putting it in the refrigerator
Sealing the food before putting it in the refrigerator helps keep it fresh for longer and helps maintain the humidity in the refrigerator. When the humidity in the refrigerator is balanced and stable, the compressor will run less, saving electricity. Therefore, users should pay attention to this when using the refrigerator.
Regularly clean the condenser
This is one of the parts that few people pay attention to when using the refrigerator. If the condenser is not cleaned regularly, it can cause the refrigerator to consume more electricity. Therefore, users need to clean the condenser at least once every 6 months (or once a year) to avoid dirt. When the condenser is cleaned regularly, it will work better, meaning that the compressor does not have to work too hard to cool the food.
Don’t leave the refrigerator door open for too long
When users open and close the refrigerator door frequently, the compressor will have to continuously adjust the temperature to maintain a certain level of coldness and humidity inside the refrigerator. Therefore, if not necessary, users should limit frequent opening of the refrigerator door, as this will help the refrigerator save electricity.
Keep food in the refrigerator
Some people mistakenly believe that having a lot of food in the refrigerator will consume more electricity. However, having food packed in the refrigerator helps balance the temperature because the food inside the refrigerator will cool on its own. If the refrigerator is too empty, users should place ice packs or ice bottles inside to maintain the temperature of the refrigerator.
Use a small refrigerator capacity for a small family
If the need to store things in the refrigerator is not much, users should choose a smaller capacity. Because of the larger refrigerator capacity, the amount of cold air needed to cool the entire space inside the refrigerator will be greater, resulting in the refrigerator consuming more electricity. To save energy, users should choose a suitable refrigerator.
Maintain a reasonable temperature
Another way to save energy is to set a suitable temperature because if the temperature is too warm, the food will quickly lose its freshness. If the temperature is too cold, the food may spoil. Therefore, users should balance and adjust the refrigerator temperature accordingly.
Regularly check the gasket
The gasket on the refrigerator is a quite important detail. If the edges are not sealed properly, the temperature inside the refrigerator will escape, so users should regularly check these details and quickly replace the gasket if any issues are found.
Keep away from power sources
Do not place the refrigerator near the microwave, other heat sources, or in direct sunlight, as these factors will heat up the refrigerator, especially affecting the efficient operation of the refrigerator compressor.
Do not put hot food in the refrigerator
When putting hot food in the refrigerator, the heat of the food will escape to warm the air inside the refrigerator. In this case, the refrigerator compressor will have to use more electricity. Therefore, users should pay attention to this if they want to save energy.
Turn off the automatic ice maker mode
When activating the automatic ice maker feature, the refrigerator will consume more electricity than normal. Therefore, users should turn off this feature when not in use or when there is enough ice in the compartment.
How to Properly Use and Maintain a Blender
In the summer heat, cool smoothies can be quickly prepared with the help of a blender. To ensure it works well and lasts for many years, with good maintenance and regular cleaning, the blender should be well-taken care of.