(TNO) iPhone and iPad charging cables often break at the connector end after extended use. This is because many users hold onto this spot to move the device. So how do you protect this vulnerable area?
![]() |
YouTube channel Aswanism recently shared a video tutorial on how to fix this issue. The solution involves using the spring from an old pen as a protective covering for the iPhone/iPad charging cable. The spring’s high elasticity helps protect the cable’s connector even when it’s bent or twisted during use.
Additionally, there are also many plastic cable wraps available on the market in various colors at affordable prices. You can use these accessories to enhance the aesthetics of your charging cable.
[VIDEO] Tips to protect your charging cable from breaking
|
You may also like
Frequently asked questions
You can use a spring from a pen to protect your charging cable. Simply remove the spring from an old pen and wrap it around the charging cable at the base of the connector. This will relieve the strain on the cable and prevent it from breaking.
The design of the charging cable for Apple devices can contribute to its fragility. The cable is thin and flexible, which makes it convenient for storage and transportation, but also means that it can be susceptible to damage over time, especially at the base of the connector where it meets the cable.
By wrapping the pen spring around the base of the connector, you’re creating a flexible support system that absorbs the stress and strain that would otherwise be placed on the cable itself. This prevents the cable from bending at sharp angles and eventually breaking.
You can use a spring from any ballpoint pen. Simply disassemble an old pen and remove the spring. It’s a very common design for pens, so you should be able to find one easily.
It’s unlikely that the spring will be too small, as most pen springs are designed to fit around the ink tube, which is similar in size to the charging cable. If it’s slightly too big, you can carefully stretch it out a bit to make it fit. Alternatively, you could try using a spring from a mechanical pencil, which tends to be thinner.