Causes and solutions for failure to ignite in a tourist gas stove

If you use a mini gas stove, you may at least encounter a case where the gas stove does not ignite. Apply the following tips to overcome the non-ignition when using a tourist gas stove (mini gas stove).

0
875

1 Causes of failure to ignite in a tourist gas stove

There are a few common causes:

  • Due to sparks : The ignition needle is misaligned.
  • Gas valve problem : The safety part of the gas shut-off valve is broken, due to gas blockage, by the user.
  • Due to out of gas : Check gas cans again.

Cách khắc phục khi không đánh lửa được

2 Ways to fix it when there is no ignition in a tourist gas stove

Step 1: Check the gas cans to see if there is gas or not. If not, you should replace gas cans of reputable brands.

Cách khắc phục khi không đánh lửa được

Step 2: In case the can has gas, it cannot ignite the gas stove. Think of it as a gas can that has too much pressure (rechargeable cans). Therefore, the safety gas shut-off unit was automatically closed, preventing gas from entering the valve. At this point, you should reset the safety gas breaker.

Cách khắc phục khi không đánh lửa được

Step 3: In case if the can is still gas and has the correct pressure (new gas can) but still can't ignite. At this point you should check the position of the ignition needle to not be. Remember, the distance between the ignition needle and the burner is 3-4 mm.

Cách khắc phục khi không đánh lửa được

Step 4: If through the above steps, the ignition still does not work, you should contact the store or supplier.

So, if you can't ignite the tourist gas stove, then apply the above remedy! Wish you have a great trip.