1 Using a hair dryer
The cleaning method is based on the principle of operation of the adhesive, you just need to turn on the dryer and apply it directly to the glue, under the effect of temperature the glue will soften and you can use it to wipe it off and it will be completely clean. whole.
Note, make sure that the dryer is placed a safe distance from the plastic surface so as not to damage the plastic surface.
2 Use soda and oil
Step 1 : Mix a little baking soda with a little oil. You can use any oil, like coconut oil or olive oil. Mix equal parts of the oil and in a small bowl until they form a paste.
Step 2 : Rub the mixture into the area with glue on it. Add enough mixture so that the adhesive is completely covered.
If you have sensitive skin, wear gloves to do this as the baking soda can dry out your hands. You can also use a dry cloth instead of your hands to scrub in the mixture.
Step 3 : Leave the mixture for 30 minutes . This allows the baking soda and oil to soften the adhesive. The longer you leave the mixture, the easier it will be for the glue to come off.
Step 4 : Remove the glue with a scouring pad. If you have a standard kitchen sponge, use a better abrasive layer. Continue rubbing vigorously until all glue is removed.
If the glue doesn't come off, apply more baking soda and oil, then let it sit for another 30 minutes and try removing the glue.
Step 5 : Wash the plastic with soap and warm water. This will remove any residue or residual oil. Wipe the plastic clean with soapy water with a damp cloth, then rinse until it's grease-free.
3 Make use of household items
Use Vinegar
Use vinegar to apply the glue on the plastic vinegar to dissolve the glue. If you don't want to waste time scrubbing the vinegar over a large area of glue, dip a cloth or paper towel in the vinegar and place it over the glue. Leave it on for 15 to 30 minutes , then wipe off the loosened residue.
To remove the vinegar smell, wash the plastic with soap and warm water afterwards.
Use alcohol
Try alcohol as a chemical-free solution for hard-to-remove glue. Dip alcohol in a cotton pad and apply it to the adhesive. The rest of the adhesive will pull up as you rub in place. Continue rubbing until all glue is removed, reapplying more alcohol as needed.
Use mayonnaise or peanut butter
Use mayonnaise or peanut butter if your plastic isn't porous. Since both of these foods are mostly fat, they contain a lot of oil, which can seep into the porous plastic.
For harder plastic, cover the glue spot with a thick layer of mayonnaise or peanut butter, then let stand for 30 minutes before removing.
Use rubber eraser
Use a rubber eraser if there is only a thin layer of glue. For example, if you've removed the label, and there's only a small amount of residue left on the plastic, rub an eraser on top of it.
Use a special glue cleaner
Use a store-bought glue remover if you've tried the above methods without success. Specialized products for removing glue, such as Goo Gone or WD-40, are highly effective in removing adhesives from plastics.
Above is an article on 3 most effective ways to remove adhesive from plastic at home. Wishing you success!
