Tips

Expert Tips for Removing Mold from Washing Machines

Don't stress when you find mold inside your washing machine because we've got some expert tips to share with you.

26 February, 2024

117

Washing machines, especially front load ones, are prone to mold formation. High humidity, dust, and bacteria from clothes, poor air circulation, all create the perfect conditions for mold to grow in the washing machine.

With front load machines, the rubber gasket that seals the main door is where mold usually appears. This leaves many homemakers at a loss on how to deal with it. But fortunately, the following expert suggestions will help you remove mold from your home washing machine.

Things you will need

To remove mold from the washing machine, you will need to prepare a few items including:

– Bleach

– Soft cloth

– Plastic bucket

– Small soft bristle brush

– Protective gloves

Steps to remove mold from the washing machine

Step 1: Check and clean, ensuring that there are no clothes inside the drum before proceeding with mold removal.

Step 2: Pour a cup of bleach into the detergent dispenser. Then, select a regular wash cycle with hot water.

Note: If you prefer not to use bleach, oxygen bleach can be used as a substitute.

Step 3: After the washing cycle is complete, if the mold has disappeared, simply use a damp cloth to wipe dry the area around the washing machine door and rubber gasket.

If the mold is still present, prepare a mixture of 1/4 cup of bleach and 2 cups of water. Put on gloves and dip the soft brush into the solution, then proceed to scrub until the mold is completely gone. Remember to keep the front door and rubber gasket dry by using a soft cloth to remove any remaining water.

Tips to prevent mold formation in the washing machine

To limit mold formation in your washing machine, keep in mind the following:

– Do not use excessive detergent or fabric softener.

– Leave the washing machine door slightly open after each wash for better air circulation.

– Use a soft cloth to wipe dry the rubber gasket and front door to prevent mold formation.

– Run a cleaning cycle for your machine on a monthly basis.

Source: Phụ Nữ Việt Nam

Frequently asked questions

Mold can cause unpleasant odors and even health issues such as allergies and respiratory problems. Removing mold from your washing machine ensures your clothes are being cleaned in a safe and hygienic environment.

Mold thrives in damp and dark conditions, so it can easily form in the nooks and crannies of a washing machine, especially if it’s not regularly cleaned or dried properly after use. Detergent and fabric softener residue can also contribute to mold growth.

Visible signs of mold include black, green, or white spots, usually found on the rubber seal, detergent drawer, or inside the drum. You may also notice a musty smell on your clothes after washing, or experience allergic reactions such as sneezing, itching, or skin irritation.

Regular cleaning and maintenance are key to preventing mold. Leave the door or lid open after each use to allow the machine to dry out. Use a washing machine cleaner or a mixture of vinegar and baking soda periodically to remove built-up residue. Also, ensure you’re using the right amount of detergent and fabric softener, and clean the detergent drawer regularly.

For mild mold, a mixture of vinegar and water can be effective. Apply the solution to the affected areas and let it sit for 30 minutes before wiping it off. For more severe mold, you may need to use a commercial mold remover or a mixture of bleach and water. Always wear gloves and a mask when handling mold and ensure the room is well-ventilated.

It’s recommended to clean your washing machine at least once a month to prevent mold and mildew build-up. More frequent cleaning may be necessary if you live in a humid environment or use your washing machine regularly.