“A Snap of the Wrist: 6 Quick Fixes to Remove a Broken Key from a Lock”

If you've broken your key in the lock, don't panic! We've got you covered with 6 simple ways to remove a broken key from a lock, no need to call a locksmith.

0
58

Old keys can wear out and break over time. If you accidentally break a key in your lock, don’t panic! Bach Hoa XANH has compiled a list of 6 easy ways to remove a broken key from a lock without calling a locksmith.

1 Using Tweezers and Pliers

Using tweezers and pliers to remove a broken key

What You’ll Need:

  • Tweezers
  • Pliers

Instructions:

Step 1 Use the tweezers to grip the key and pull it out, then clamp it securely to prevent it from slipping back in.

Step 2 Use the pliers to grip the exposed part of the key and pull it out.

Note: This method works best with two people. One person can use the tweezers while the other uses the pliers to easily remove the key.

2 Using a Plastic Card

Using a plastic card to remove a broken key

What You’ll Need:

  • A plastic card, such as a credit card
  • Super glue
  • A sharp knife

Instructions:

Step 1 Cut a piece of plastic from the card that is slightly smaller than the keyhole.

Step 2 Use the knife to scratch one side of the plastic, then apply super glue to the scratched surface.

Step 3 Insert the glued side of the plastic into the keyhole, between the key and the lock. Wait for the glue to dry, then gently pull out the key.

Note: This method works best with flat keys. Be careful not to get glue on the outside of the lock, as it may make it more difficult to remove the key.

3 Using Scissors

Using scissors to remove a broken key

What You’ll Need:

Instructions:

Step 1 Insert the scissors into the keyhole and use the tips to grip the broken key.

Step 2 Gently pry the key out of the lock using the scissors.

Be careful and gentle to avoid any accidents with the sharp scissors.

4 Using a Metal Rod

Using a metal rod to remove a broken key

What You’ll Need:

  • A hammer
  • A metal rod
  • Pliers

Instructions:

Step 1 Use the hammer to flatten the metal rod so that it can easily fit into the keyhole.

Step 2 Use the pliers to bend one end of the metal rod.

Step 3 Insert the bent end of the metal rod into the keyhole and gently pry out the broken key.

5 Using a Drill

Using a drill to remove a broken key

What You’ll Need:

  • A drill
  • A small drill bit (around 2mm)

Instructions:

Step 1 Securely clamp the lock in place to prevent it from moving.

Step 2 Use the drill to make a small hole next to the broken key in the keyhole. Use the drill bit to gently pull out the broken key.

6 Using Candle Wax

Using candle wax to remove a broken key

What You’ll Need:

  • Candle wax
  • A lighter or match

Step 1 Melt the candle wax with the lighter or match, then quickly insert it into the keyhole.

Step 2 Wait for 3-5 minutes to allow the wax to harden. Once it’s dry, gently pull out the key.

This method works best with flat keys that are not inserted too deeply into the lock.

A broken key in a lock can be frustrating. Check out more  for quick and easy solutions that anyone can try.

Frequently asked questions

There are several ways to remove a broken key from a lock. You can try using a snap-off screwdriver, a hook, or a paper clip. You may also use a lubricant to help remove the key, and if all else fails, you can try using a drill, but this should be a last resort as it may damage the lock.

You can use a snap-off screwdriver, a hook, or a paper clip. A snap-off screwdriver is a type of screwdriver that has a blade that can be snapped off, which can be useful for removing broken keys. A hook or a paper clip can also be inserted into the keyhole to hook and pull out the broken key.

Yes, using a lubricant can help remove a broken key from a lock. Spray the lubricant into the keyhole and allow it to penetrate for a few minutes before attempting to remove the key with a tool.

You can use a penetrating lubricant, such as WD-40, to help remove the broken key. These types of lubricants are designed to loosen rusted or frozen parts and can help dislodge the broken key from the lock.

If you’re unable to remove the broken key with the aforementioned tools, you may consider using an electric drill as a last resort. Carefully drill into the broken key, being mindful not to damage the lock. This method should only be attempted if you’re comfortable using power tools and have taken the necessary precautions.

To prevent your key from breaking in the lock, make sure to use the correct key for the lock and avoid forcing it. Also, keep your keys away from moisture and extreme temperatures, as these conditions can weaken the metal over time, making it more prone to breaking.
You may also like

Tips for Quickly and Easily Removing a Broken Key from a Lock at Home

Are you ever in a difficulty where you have a broken key in the lock at home? Dien May XANH has a comprehensive guide to helping you solve this problem in a quick and easy way. Keep reading to find out more!

Discover the Perfect Eyebrow Shape for Your Face

Having trouble achieving the perfect brow shape? Fear not – with this simple guide, you’ll be able to master the art of trimming your eyebrows at home with minimal effort and fuss. Keep reading to discover how to create an aesthetically-pleasing and flattering eyebrow shape!

Not only for picking up food but also can become a secure lock for the door

Throughout history, the fork has been commonly used in eating as a utensil, alongside spoons and chopsticks. However, the fork has many other uses, with one of the most prominent being its transformation into a key. This allows it to securely lock doors, providing enhanced safety and security.

9 Surprising Uses of Cooking Oil in Range Hoods: Don’t Throw It Away, It’s a Treasure

The waste oil in a range hood cannot be used for cooking, but it is not something to be thrown away. If you know how to make use of it, they can actually become treasures.

Unlock the secret of the small hole in typical locks that many people don’t know how to use, turns out it has an unexpectedly interesting function.

These small holes on this lock have unexpected uses, but most people are unaware of their functionality.