Slow juicers are becoming a popular choice for households, as they produce delicious and nutritious juice while preserving almost all the nutrients. However, what happens when your slow juicer suddenly gets jammed and stops working? This article will provide you with the necessary information to troubleshoot and fix a jammed slow juicer without causing any harm to the appliance.
1. Reasons for a Slow Juicer Jamming
Knife Jamming
One common issue you may encounter with your slow juicer is knife jamming, where the knife becomes stuck and unable to rotate. This usually happens when you feed too much produce into the juicer at once, especially fibrous and pulpy fruits and vegetables such as , , and… Large, hard vegetables can also cause obstructions during juicing.
Knife jamming due to overloading the juicer
Clogged Filter
Another possible reason for your slow juicer to jam is a clogged filter. When there is a buildup of pulp and it is not cleared out in time, it can block the filter holes, preventing the juice from flowing out smoothly.
Clogged filter due to excess pulp
Lid Jamming
In some cases, the lid of the juicer may get jammed. This typically occurs when you juice fibrous vegetables or produce that creates a large amount of pulp.
Lid jamming due to fibrous produce or excess pulp
2. Troubleshooting a Jammed Slow Juicer
Fixing a Slow Juicer with a Jammed Knife
It is important to choose produce that is not too hard and has a high water content. Older, fibrous vegetables should be avoided. Always prepare your produce by cutting it into smaller pieces and avoid overloading the juicer.
Cut produce into smaller pieces to prevent knife jamming
Unclogging a Slow Juicer Filter
If you notice that the juice flow has slowed down, unplug the juicer and remove the filter for cleaning. Rinse or wipe it dry, then reinstall it. It is recommended to clean the filter, pulp container, and knife after each use. Additionally, follow this rule: Soft before hard, less fibrous before more fibrous. This ensures that the harder, more fibrous produce will help push out the pulp from softer produce.
Cleaning the filter to fix a clogged slow juicer
Resolving a Jammed Lid
If your juicer’s lid is jammed shut, use the reverse button (if your model has one) to push the produce back up. Then, carefully pull the lid open with a slight force. Alternatively, adding a moderate amount of water can help loosen the pulp and make it easier to open the lid.
Using the reverse button to unjam the lid
We hope that these tips will help you troubleshoot and fix a jammed slow juicer without any hassle. Happy juicing!
How to Fix Windows 10 Error Not Recognizing Enough RAM with Tech Support Tips
Are you having problems getting Windows to recognize all the available RAM on your device? Don’t worry, this article will show you some troubleshooting steps to get the memory up and running. Learn about the different potential reasons Windows may not be registering your device’s total memory.