9 Common Causes of Vibrations in Washing Machines
Here are nine common causes of vibration in a washing machine, along with immediate solutions you can apply:
Positioning the Washing Machine On an Uneven Surface
Reason:
If the washing machine is placed on a rough surface, it can easily tilt, causing the drum to collide with the washing machine shell during operation. This can result in a loud noise.
Steps to resolve the issue:
- Please ensure that the surface of the washing machine location is flat. If it is not, consider moving the washing machine to another position or balancing it.
- You can also enhance the stability of the washing machine by using hardwood boards or pouring hard concrete to create a sturdy surface that won’t interfere with its operation.
Non-Standard Washing Machine Feet: An Alternative Option
Reason:
When inspecting the flatness of the floor, it is essential to also examine the feet of the washing machine, which are responsible for connecting to the bottom of the machine’s barrel.
Using non-standard or damaged washing machine feet can cause the drum to tilt, resulting in strong vibrations during operation.
Instructions for resolution:
Inspect the base of the washing machine and take note of any looseness or damage. In case of loosening, utilize it to tighten the screw securely. However, if the foot is damaged, it is imperative to promptly replace it with a new one to ensure optimal functionality and performance.
Effects of Overloading Clothes in Drum on Washing and Spinning Performance
Our washing machines are designed to handle various laundry loads, accommodating the specific requirements of each product.
It is important not to overload the washing machine drum with laundry. Exceeding the machine’s washing capacity can have negative effects on both the cleanliness of the clothes and the longevity of the machine. Therefore, it is advisable to follow the manufacturer’s guidelines and avoid overloading the drum.
Improper clothing classification and disorganized arrangement within the washing machine can lead to entanglement, resulting in garments being twisted together. During the washing process, this can cause eccentricity and ultimately lead to the drum tilting. As a consequence, the washing machine will produce strong vibrations and emit loud noises while in operation.
To resolve the issue, follow the steps below:
- Pre-sorting clothes is highly recommended prior to washing in order to preserve the fabric and minimize tangling during the wash cycle.
- Always check the load of clothes before starting the washing machine to ensure that you do not exceed its recommended capacity.
- Arrange clothes in the washing tub to minimize tangling and maintain their quality during the washing process.
- It is imperative to pause the washing program if the washing machine detects excessive noise and strong shaking. This action allows for prompt adjustments to be made to the laundry inside the drum.
Error in Installing Front Loading Washing Machine Due to Unremoved Set Screw
Professional Reminders
- Attend the team meeting tomorrow at 9 am.
- Prepare your report for the client presentation next week.
- Submit your timesheets for the previous month by Friday.
If the line is improperly installed or the screw has not been removed during machine installation, it can lead to strong vibrations and noise from the drum.
To resolve the issue, follow these steps:
- Please ensure that the washing machine is installed correctly by carefully reading the product manual or seeking the assistance of a technician.
- Please ensure to check the set of screws when installing the front loading washing machine.
Accidental Objects Left in Drum Discovered
Reason:
The omission of foreign objects inside the drum can easily result in them colliding with the drum’s wall during machine operation, leading to excessive noise.
Metal objects such as sharp edges can cause scratching and damage to the drum, and may also impact the longevity of clothing during the washing process.
Solution:
Please ensure that you thoroughly inspect the drum and pockets of the clothes before commencing the washing cycle to ensure no foreign objects such as keys, pens, stones, aluminum clips, or similar items are present. This will help prevent any damage to the washing machine.
Fixing a Broken Shock Absorber Spring
Reason:
The washing machine shock absorber is an essential component designed to absorb vibrations generated by the washing tub. Its purpose is to reduce shocks and vibrations, thereby ensuring the machine remains balanced during high-speed spin cycles. In the unfortunate event of damage to this critical part, the washing machine may lose its balance and impact forcefully, leading to an audible noise disturbance.
Solution:
If your washing machine’s shock absorber is malfunctioning, it is advisable to promptly reach out to the service and repair center. A qualified technician can inspect, repair, or replace the component as needed.
Shock Absorbers
Insufficient Water Supply to Washing Machine
Reason:
The washing machine is experiencing inadequate water supply, which can be attributed to low water pressure or the user’s preference for water conservation by selecting a lower water level setting. As a result, the washing cycle is hindered, as there is insufficient water to facilitate the necessary friction between the clothes and the drum.
The washing machine will emit a loud noise during the washing and rinsing cycles.
To resolve the issue, follow these steps:
- It is recommended to allow the washing machine to determine the necessary amount of water based on the size of the clothing load in the drum. It is best to avoid using the optional water level setting in order to conserve electricity.
- It is important to regularly check the quality of the water source and periodically clean the water pipes and washing machine. This will help prevent the build-up of deposits and dirt, which can negatively affect the performance and operation of the washing machine.
Is the Washing Machine Too Old or Damaged?
Reason:
Old or damaged washing machines can lead to excessive vibrations, loud noises, and other signs of damage.
Solution:
- It is highly recommended to regularly check your washing machine, ideally every 3 to 6 months, to promptly identify any abnormal signs. This preventive measure can help save on repair costs compared to waiting until the issue becomes more severe.
- It may be advisable to consider replacing your washing machine if it has been in use for an extended period of time, specifically if it exceeds 8 years. This is particularly true for older washing machine models that are no longer in high demand in the market. When components break or malfunction, it can be challenging to find suitable replacements for repair or replacement purposes.
Broken Core and Bearing Parts Reported
Reason:
Bearings play a crucial role in the smooth movement and rotation of a washing machine’s motor, while also minimizing friction and effectively supporting loads. As a result, if the core or bearing components become damaged, the washing machine may emit loud noises and experience strong vibrations.
To resolve the issue, follow these steps:
If you need assistance with checking and replacing this component, it is recommended to consult refrigeration experts at the refrigeration repair service center to obtain prompt and accurate support.
Should Homeowners Repair a Shaking Washing Machine?
Experiencing a shaking washing machine may initially seem inconsequential during regular laundry routines. However, it is crucial not to overlook this issue as it has the potential to harm vital internal components and diminish the overall lifespan of the washing machine.
To ensure efficient cleaning and prolong the lifespan of your clothes, it is crucial to promptly detect and address any potential issues.
If you are unsure about professional knowledge in this field, it is recommended to seek assistance from a refrigeration technician. This will help prevent the issue from escalating and incurring expensive repair costs.
Dealing with Vibrations on Washing Machines: Here are 3 Tips to Consider
When encountering vibration issues with your washing machine, it is important to consider the following factors:
- Select a suitable and stable location to position the washing machine in order to avoid any interference with its operation.
- Properly install the washing machine by carefully following the instructions provided by the manufacturer.
- Please ensure that you thoroughly inspect clothing pockets and drums for any hard or sharp objects.
- Regular maintenance of the washing machine is essential to ensure its functionality and longevity. In addition to routine cleaning, it is crucial to replace the appliance if it has been in use for an extended period.
- It is important to exercise caution when attempting to repair a washing machine. Without sufficient professional knowledge, attempting to fix the machine could potentially worsen any existing errors, resulting in costly repair bills.
- It is vital to select and utilize authentic components to guarantee the proper functioning of the machine during operation.