Maximising Durability and Cutting Electricity Costs with the Lock&Lock Super-Fast Electric Kettle

Do you want to make the most of your Lock&Lock electric kettle? Read on to find out useful tips you can use to make sure you are using and caring for your electric kettle efficiently, helping it to last and saving energy.

Administrator

17 August, 2023

297

Steps to Use Lock&Lock Super Fast Boiling Kettle

Step 1: Open the Lid

To open the lid of the Lock&Lock super fast boiling kettle, pull the switch on the lid of the kettle. Do not use this method if the lid is lost or damaged.

Step 2: Place the Electric Base

Place the electric base on a flat, stable, and heat-resistant surface to ensure stability and safety during use. Avoid placing the kettle in areas that may come into contact with water or other sources of heat.

Step 3: Pour Water into the Kettle

Ensure the water level in the kettle is appropriate. Avoid pouring too much water to prevent overflow and potential electrical leaks. Similarly, do not pour too little water to prevent the kettle from running out of water and burning.

Step 4: Place Filled Kettle on Electric Base

After pouring the appropriate amount of water into the kettle, place the kettle on the electric base. Ensure the kettle is in a dry, well-ventilated, and flat area.

Step 5: Plug in the Kettle

Plug the power cord of the kettle into a socket to connect the power for boiling water.

Step 6: Turn on the Kettle

Press the power on/off button on the handle of the kettle to activate the kettle and initiate the boiling process.

Step 7: Automatic Power Off

The kettle will automatically turn off the power when the water boils. The switch button and indicator light will stop flashing. You can also manually turn off the kettle by switching off the power switch.

Notes for Using the Lock&Lock Super Fast Boiling Kettle

Avoid Boiling Water in AC Rooms or in Front of Fans

Avoid using the kettle and boiling water in rooms with air conditioning or in front of fans as it may cause excessive steam and energy waste.

Do Not Share Power Outlets with High-Power Devices

Plug the power cord of the kettle into a separate socket and avoid sharing power outlets with high-power devices to prevent overload, fire, or electrical short circuits.

Ensure electrical safety by avoiding holding the power cord to unplug it. Instead, hold the plug directly to prevent the risk of electric shock. Also, do not use the super fast boiling kettle with wet hands to avoid potential electrical hazards.

Do Not Continuously Boil Water in the Kettle

Avoid continuously boiling water for an extended period as it may overload the kettle’s operation. Allow the kettle to rest for about 20 – 30 minutes after boiling water to optimize its efficiency and prolong its lifespan.

Only Boil Enough Water Needed

Pour the appropriate amount of water or slightly more into the kettle for boiling. Avoid boiling more than the allowed water level specified by the manufacturer’s instructions to optimize the kettle’s operation.

Do Not Turn on the Kettle without Water

Never turn on the Lock&Lock super fast boiling kettle without water as it may quickly overheat and cause damage or electrical safety hazards.

Tips for Cleaning and Storing the Lock&Lock Super Fast Boiling Kettle

Follow these tips to clean and store the Lock&Lock super fast boiling kettle correctly:

Clean and sanitize the kettle regularly every 6 months.
Avoid rinsing the kettle under strong running water to prevent damage.
Allow the kettle to cool completely before cleaning if it has just boiled water.
Do not use a metal or steel wool brush to clean the kettle.
When cleaning the inside with baking soda and vinegar, pour water only halfway to prevent excessive boiling.
After boiling water, leave about 50ml in the kettle to prevent thermal shock on the bottom.

Above is a guide to using the Lock&Lock super fast boiling kettle to increase durability, ensure safety, and save energy. Feel free to leave a comment if you have any further questions!