Simple and Quick Way to Replace Watch Leather Strap at Home without Any Cost

Replacing a leather watch strap may seem complicated but it’s actually quite simple. With a little skill, you can do it yourself at home without having to spend money at a store. If you don’t know how to replace a leather watch strap, check out the following article by FPT Shop!

1. How to replace a strap with a buckle

Thanks to modern buckle watch straps, removing and installing a strap has become incredibly simple. With just a few basic steps, you can quickly and easily replace the strap of your beloved watch.

1.1. Removing a strap with a buckle

• Step 1: First, turn the watch face down. Look at the end of the strap that connects to the watch, and you will see a small buckle.

• Step 2: Next, secure the watch in your right hand. Then, use your left thumb to gently slide the buckle to the left to remove it. Apply the same method to the other side of the watch strap.

1.2. Installing a strap with a buckle

Similar to removing a strap, installing a strap with a buckle is also very simple with the following steps:

• Step 1: Firstly, turn the watch face down and look at the clasp retaining part of the case. You will see a small hole for attaching the new strap.

• Step 2: Insert one end of the buckle into the front hole. Then, use your right thumb to gently slide and move the buckle to the corresponding position.

2. How to replace a strap without a buckle

2.1. Prepare the necessary tools

Before replacing a strap without a buckle, you need to prepare some tools as follows:

• A new leather strap to replace the old one
• Watch strap replacement tools (you can buy these tools at a watch store or simply use a needle or screwdriver)
• A piece of soft leather or cloth to cushion the watch

Note that besides preparing the tools, you also need to know the following important things:

• The watch strap replacement tools are necessary
• Choose a comfortable place to replace the strap, such as a dining table, study table, etc.
• Prepare a cushioning pad for the watch made of cloth or leather to avoid scratching it
• You need to remove and install the strap from the back of the watch to avoid damaging or scratching the front

2.2. Removing a strap without a buckle

• Step 1: First, use a strap removal tool to press the slot between the strap and the case retaining part. Then, continue to press gently to compress the buckle and push it out slowly from the strap.

• Step 2: Apply step 1 to the other end of the strap as well. Remember to remove the buckle lock for reuse when installing the new strap. If there is an external buckle hole on the strap, use a needle to poke it, and the buckle lock will automatically open.

2.3. Installing a strap without a buckle

• Step 1: Firstly, take the removed buckle from the old strap (or use a new one if available) and insert it into the hole of the new strap so that the two ends are even, and the buckle head sticks out.
• Step 2: Insert one end of the buckle into the front hole, then use a tool to compress the remaining buckle head and gently push it into the corresponding hole. Normally, the buckle half with the lock will be at the upper part of the strap (12 o’clock direction).
• Step 3: At this point, you just need to try it on to check the firmness of the buckle and strap.

3. How to properly maintain a leather strap for a durable and beautiful watch

A watch strap is an important accessory that contributes to the elegant and sophisticated appearance of the wearer. However, to keep a leather watch strap durable and beautiful, you need to know the proper maintenance tips:

• Avoid contact with water and chemicals: Leather watch straps can absorb water and chemicals, causing mold, fading, and rapid deterioration. Therefore, you should take off your watch when bathing, washing hands, or when in contact with chemicals.
• Regular cleaning: You should clean the watch regularly, especially the leather strap, by using a soft cloth to remove dust and sweat. If the strap is heavily soiled, you can use warm water diluted with soap or a specialized watch cleaning solution to clean it.
• Natural drying: After cleaning the leather strap, you should dry it in a well-ventilated place, avoiding direct sunlight. Do not use a hairdryer or microwave to dry the strap as it may damage it.
• Use leather conditioner: If the leather strap becomes dry and stiff, you can use coconut oil, olive oil, or specialized leather conditioners to moisturize it.

Conclusion

So now you have learned how to quickly, easily, and cost-effectively replace a leather watch strap with FPT Shop. Additionally, you should also remember the ways to properly maintain a leather strap to make it last longer. See you in the next articles by FPT Shop!