Solving the Device Not Migrated Error on Windows: A Step-by-Step Guide

When installing system updates, Windows may relocate the configuration settings of certain devices in order to achieve compatibility. However, if this procedure is unsuccessful, Windows may encounter challenges in detecting external devices such as hard drives, audio devices, and monitors. In such cases, you may encounter an error message stating “Device not migrate” on your Windows 10 or Windows 11 computer.

Errors of this nature have the potential to disrupt the functionality of external devices. You need not fret, as these issues can be promptly rectified through one of the following solutions.

Troubleshoot Hardware and Device Issues Using the Tool

To address the “Device not migrate” error, we recommend running the Hardware and Devices troubleshooting tool, which is a built-in feature of Windows. This tool conducts a comprehensive scan of all connected external devices to detect and resolve any irregularities.

Step 1: Press the shortcut key Windows + R to open the Run dialog box. Enter the following command in the Open field and press Enter.

1. Step 2: In the new window that appears, click on Advanced.

1. Step 3: Click on the Apply repairs automatically option and click the Next button to proceed.

Please wait for the troubleshooting tool to detect and automatically address any related issues. Afterward, please verify if the “Device not migrate” error persists.

Troubleshooting Device Driver Issues

During the update process, Windows may encounter issues with migrating device drivers, particularly if they are corrupted. In such instances, an error message reading “Device settings were not migrated from previous OS installation” may be displayed. Should you encounter this error, a potential solution is to attempt uninstalling and subsequently reinstalling or updating the problematic driver. By doing so, you may be able to resolve the issue at hand.

1. Go to the Start menu and right-click on the Start icon.
2. Select Device Manager from the options menu.

Step 2: In the Device Manager window, locate the problematic driver in the list. Right-click on it and select Uninstall device.

Step 3: Click the Uninstall button to confirm the removal of this driver. 

Please restart your computer and Windows will automatically reinstall the missing driver during the boot process, thereby effectively resolving this error.

Scan Windows 10 for Vulnerabilities Using SFC and DISM Systems

If Windows fails to migrate device settings, it could be due to inaccessible or missing system files on your computer. To resolve this issue, you can utilize two integrated tools – SFC (System File Checker) and DISM (Deployment Image Servicing and Management) – to scan and repair these files accordingly.

1. Step 1: Right-click on the Start menu icon and select Command Prompt (Admin) from the displayed menu.

Step 2:

Click the “Yes” button to close the User Account Control (UAC) window and proceed.

1. Open the command prompt as an administrator.
2. Type the following command and press Enter: sfc /scannow
3. Wait for the scan to complete. It may take some time.
4. After the scan is complete, type the following command and press Enter: dism /online /cleanup-image /restorehealth
5. Wait for the DISM scan to complete. This may also take some time.
6. Restart your computer.

1. Step 4: After completing the SFC scan, proceed to run the DISM system scan by entering the following commands in the command prompt window one at a time, pressing “Enter” after each command.

Once the scanning process is finished, please restart your computer. This will resolve the “Device not migrate” error on your Windows 10 or Windows 11 system.

“New Windows 10 Update Available”

To ensure optimal system performance and security, it is important to regularly update Windows. In addition to offering new features, these updates also include security patches that address vulnerabilities and resolve various system errors. One such error that can be resolved through updating is the “Device not migrated” error. To update Windows and resolve this error, please follow the steps outlined below.

1. Step 1: Access the Start > Settings menu or press the Windows + I key combination.

Step 2:

1. Open the Windows settings.
2. Navigate to the “Updates & Security” section.
3. Click on the “Check for Updates” button to allow Windows to search and install any available updates.

“How to Use System Restore in Windows 10”

If you have recently made changes to your system and are encountering the “Device not migrate” error, attempting the aforementioned solutions without success, it is recommended to perform a system restore. This process will enable you to revert your system back to a previous stable state.

The system restore process will not delete any of your existing files or data. However, it will uninstall any programs or updates that have been installed after the restoration point you select.

Step 1: To begin, locate and click on the search icon in the taskbar. In the search box, type “create a restore point” and then select the first result that appears.

Step 2: Open the “System Properties” window and navigate to the “System Protection” tab. Locate the “System Restore” button and click on it.

Step 3: Select the Recommended restore option in the following window and click the Next button to proceed. Follow the on-screen instructions to complete the process.

Step 4:

Click the Finish button. Windows will then restart the system and begin restoring the system to the selected state.

How to Change BIOS Password Without Knowing Existing Password

The Basic Input Output System (BIOS) is an essential component that facilitates the proper booting of a computer by ensuring the harmonious interaction of all hardware components. In the event of encountering the error message “Device was not migrated due to partial or ambiguous match” on a Windows system, it is likely that the issue lies with the BIOS settings. In such cases, the recommended course of action is to reset the BIOS to its default configuration. This can be accomplished by following the steps outlined below.

1. Step 1: Press the shortcut keys Windows + S to open the search menu.
2. Type Recovery options in the search box above and press Enter.

Step 2: In the displayed Settings app window, click the Restart now button in the right pane of the Advanced startup section to boot the system into the advanced setup window.

Step 3:

Click the “Restart now” button in the displayed dialog box to confirm restarting the system.

1. Step 4: After restarting the computer, select the Troubleshoot option in the newly opened window.

1. Step 5:

Next, click the “Advanced options” option to continue.

Step 6: Choose the UEFI Firmware Settings option

Step 7: To restart your computer into the BIOS, simply click the Restart button. Please be aware that the appearance of the BIOS menu may vary depending on the manufacturer and model of your computer.

1. Step 8: Access the BIOS by pressing F9.
2. Within the BIOS, locate the Setup Defaults option.
3. Click on the Yes button to confirm the selection.

1. Step 9:

To resolve the “Device not migrate” error, please follow these steps:

2. Press F10 to save the changes and exit the BIOS.
3. Restart your computer.

Fixing errors like “Device not migrate” can be challenging without clear indications of the specific issue. However, there are several solutions that can potentially resolve the “Device not migrate” error on Windows 10 or Windows 11 computers. By following the solutions mentioned above, users can work towards resolving this error and ensuring a smooth migration process.

Read more

• 5 Methods to Resolve Bluetooth Unavailable Problem on Windows 11
• Read our guide on troubleshooting printer detection issues in Windows 11