Easy and Comprehensive Guide for Starting a Motorcycle Unused for an Extended Period

If you've not used your motorbike or scooter in a while, you may find that the engine won't start up. GREEN Electric Machine can provide you with simple and detailed explanations of the possible causes and solutions - have a look!

0
356

2 Identifying Common Causes of Motorcycle Difficulties Starting and How to Resolve Them

There are several reasons why motorcycles can be challenging to start, including:

Impact of Cold Weather on Fuel Supply

The cold weather causes the engine to remain in a cold state, inhibiting the evaporation of gasoline necessary for carburetion. Consequently, both the engine and gasoline are at low temperatures, resulting in the initial challenge of restarting the engine.

Thời tiết chuyển sang lạnh khiến nhiên liệu bị ảnh hưởng

Solution: Follow these steps to start the car:

  1. Before starting the car, ensure that the lights are turned off. This ensures that the electricity from the battery is focused on the starter.
  2. Next, locate the lever under the left handlebar, and pull it all the way down to increase fuel.
  3. Then, pedal the start lever about 3-5 times, while simultaneously turning the throttle with the same rhythm at 1/4 of the throttle.
  4. Finally, press the car start button to initiate the car’s engine.

Power Dwindles Quickly in Batteries

One plausible explanation for these occurrences is that the vehicle’s battery has been depleted. This can be observed when the start button is pressed and the engine emits a feeble or nonexistent sound. Furthermore, the horn may produce a lackluster output or the turn signal may fail to function properly.

Bình ắc quy hết điện

How to Fix:

If your car is not starting, you can try turning off the engine and letting it rest for 3-5 minutes before attempting to restart it. If the issue persists, it is recommended to take your car to a reputable repair shop to have the battery replaced.

Spark Plug Ignition Issue Resolved

One crucial factor contributing to motorcycle starting issues is the condition of the spark plug. Spark plugs play a vital role in initiating the ignition process. When left unused for extended periods, spark plugs may deteriorate or accumulate substantial soot, impairing their functionality.

Bugi đánh lửa gặp vấn đề

To resolve the issue, it is recommended to inspect the spark plugs and visit a certified automotive repair facility to have them replaced with new ones.

Car Gas Clog Causes Delays

One of the reasons for car performance issues is prolonged inactivity, which can result in a buildup of excess gasoline in the fuel tank, causing gas suffocation. Despite having a functioning ignition, starting the engine becomes challenging due to this phenomenon.

Instructions: To resolve the issue, ensure that you secure the motorcycle’s gas cap tightly and switch off the throttle. Start the engine multiple times until it starts. You may notice some initial rattling noise, which should gradually subside.

How to Prepare a Motorcycle for Spring after a Winter Hiatus

Tips for Keeping Your Motorcycle in Peak Condition: Cleaning and Oiling

Regular car maintenance is essential for keeping your vehicle in optimal condition. By washing your car monthly, you can prevent dirt accumulation and the potential for engine issues caused by dust. Additionally, scheduling regular maintenance and oiling is crucial to ensure your car is operating at its best.

Vệ sinh xe máy thường xuyên, tra dầu đầy đủ

Verify the Fuel Level in the Tank

To ensure optimal performance and avoid any inconveniences, it is important to regularly monitor the gasoline indicator line on your motorcycle. By paying attention to this, you can ensure timely refueling and prevent any disruptions to your schedule. Neglecting to do so can result in the motorcycle running out of gas and consequently shutting down. Stay vigilant and avoid such situations by regularly checking and refilling your motorcycle’s fuel tank.

Kiểm tra xăng trong bình

Activate Fuel Pump System by Turning on the Key

It is common for individuals to utilize motorbikes as a means of transportation. Oftentimes, there can be a tendency to immediately activate the engine without allowing the vehicle to adequately refuel. This can result in a prolonged situation of fuel deprivation, causing the motorbike to deteriorate over time. Therefore, it is recommended to first let the motorbike run for 2-3 minutes upon starting it in order to prevent such fuel suffocation and maintain the longevity of the vehicle.

Bật chìa khóa và chờ hệ thống bơm xăng hoạt động

Pushing the Pedal to Get the Bike Engine Running

To efficiently transfer gasoline to the combustion chamber, it is vital to follow these steps. Prior to starting the engine, engage the bike pedal to facilitate the pumping of gasoline into the chamber. Once this is done, proceed to start the car and utilize it accordingly.

Sử dụng cần đạp để khởi động xe

Electric Vehicle Battery Charger Hits the Market

If you notice any issues with the vehicle’s performance, such as a weak throttle or malfunctioning features like horns or turn signals, the problem might be the battery. In such cases, it is advised to check and charge the battery. After doing so, simply restart the car and everything should return to normal.

Sạc điện bình ắc quy

You may also like

What to do when the motorcycle battery has been idle for too long and runs out of power?

If you have a motorcycle sitting idle for too long and the battery is dead, follow these steps.

The Fastest Way to Extend the Battery Life of Your iPhone or Android Phone

Battery discharge is the process of using a phone until the battery is completely depleted, resulting in the phone automatically shutting down. Afterwards, the user will recharge the battery to restore full power to the device. Typically, you would periodically discharge the battery to enhance its lifespan.