4 Easy and Simple Ways to Clean Window Cracks

These little tips will bring amazing benefits, helping the window frame quickly get rid of dirt and shine brightly.

24 October, 2023

200

Windows and window sills are often the main breeding grounds for fungi and bacteria due to external factors such as dust and rainwater directly impacting them. While window sills are often difficult to clean due to their narrow design and inconvenient location. However, if left for a long time, everything accumulates and clings to the gap, which can cause dust to fly into the house, harm people’s health, and affect the normal opening and closing of the windows.

Here are some simple ways to clean, using only a few household items and spices, with 5 minutes of patience, you can “get rid of” any worries when thinking about cleaning window gaps.

1. Cleaning window gaps with spices

– Preparation:

Table salt

Baking soda

White vinegar

Toothbrush

Dry paper or clean cloth

– Execution:

First, take a little salt and sprinkle it on the gap, then add some baking soda on top, and finally pour some white vinegar on top of the baking soda.

2 simple and easy ways to clean window gaps - Image 1. — Baking soda and white vinegar will create a chemical reaction, with a strong detoxifying ability.

After pouring, you can spread a layer of paper towel on top and leave it for 5 minutes. At the end of this time, simply wipe the window gap gently with the paper towel.

This way, the window gap can be easily cleaned.

2. Cleaning open window sills with salt and beer

– Preparation:

Beer

Salt

Dry cloth or paper

– Execution:

First, sprinkle some salt on the window sill, then pour some beer on it.

The combination of salt and beer will create a lot of foam, at which point the salt acts as a friction allowing for easy wiping and removal of dirt on the window sill.

Next, use a toothbrush to scrub the gaps in the window sill a few times and use a dry cloth to wipe it off. At this point, you will see that even stubborn dirt can be easily removed.

3. Cleaning window gaps with a sponge and dish soap

– Preparation:

Dishwashing sponge

Utility knife

Marker

Dish soap

– Execution:

For dirty window gaps, simply take a dishwashing sponge, then place the sponge on the gap to mark the positions of the gaps with a marker. Then, take a utility knife and cut along the marked line.

When gently pushing the sponge through the window gaps, the layer of dust will quickly be removed along with the dishwashing sponge.

2 simple and easy ways to clean window gaps - Image 2. — Note that the dishwashing sponge should not be cut apart, but only cut to the blue layer.

If the dirt has been there for a long time, you can use a diluted dish soap with water and soak the sponge in it. Then use the sponge to wipe the window gap.

Finally, use a dry cloth or paper to wipe as in the above steps.

4. Cleaning window gaps with a vacuum cleaner and toilet paper core

– Preparation:

Vacuum cleaner

Toilet paper core

– Execution:

Perhaps before cleaning, what you need to do is to remove the dust so that the next process can proceed more easily and quickly.

Accordingly, if you have a vacuum cleaner at home but cannot reach the narrow window gap to clean all the dust. Don’t worry, you can add a toilet paper core on top of the vacuum cleaner.