Exploring Solutions to Prevent Gas Stove Fires

Reasons Why Your Kitchen Stove May Ignite and How to Fix Them

1Kitchen valve is not locked, causing leakage

If the kitchen valve is left unlocked, it can lead to gas leakage when the stove is turned on, posing a danger to the users. This can occur if the valve is forgotten to be closed after use or due to long-term usage causing the valve to leak.

How to fix:

• Always ensure to carefully lock the kitchen valve after using the stove. Additionally, lock the valve of the gas cylinder to minimize the possibility of gas leakage.
• If you notice that the gas cylinder is old, rusty, or the kitchen valve is broken or leaking, it is advisable to seek assistance from a technician to replace the gas cylinder and gas valve for safety reasons.

2Gas line not sealed

An unsealed gas line is a common cause of stove ignition. This can occur due to reasons such as animal bites, long-term usage, poor pipe quality, or accidental pipe punctures while moving the gas stove.

How to fix:

• Replace the gas line for the stove.
• If you are unsure about how to install it, it is recommended to seek assistance from a repair center.

3Gas cylinder leaking gas

A leaking gas cylinder poses a high risk as it ignites the stove when turned on. Causes of gas cylinder leakage include the cylinder being too old, punctured, rusty, a broken lock valve, or forgetting to close the cylinder valve after cooking.

How to fix:

• Always ensure to carefully lock the gas valve after each use.
• When changing the gas cylinder, avoid choosing old or rusty ones.
• Replace the gas cylinder with a new one that has a good quality casing to prevent gas leakage.

4Misaligned or misplaced flame divider

A misaligned or misplaced flame divider not only causes the stove to ignite but also wastes gas, takes longer to cook, and reduces efficiency. This can occur when users accidentally move the flame divider away from its original position or neglect to clean it, causing the gaps to become clogged.

How to fix:

• Regularly check and place the flame divider in the correct, balanced position.
• Clean the flame divider regularly and remove any debris that may be clogging the gaps.

5Failed pressure regulator valve

A malfunctioning or broken pressure regulator valve can cause high pressure from the gas cylinder to the stove, leading to excessive gas escaping and igniting the stove. This could be due to production-related issues or poor quality installation of the pressure regulator valve.

How to fix:

• Check the pressure regulator valve and replace it if it is damaged.
• For the quickest and safest solution, contact a repair center to ensure the safety of users.

If you suspect any other causes of stove ignition, please let us know to ensure the safety and convenience of cooking.