Plastic Bottle Holder for Toilet Tank: Fresh, Clean, and Water-saving

To maintain a clean restroom, don't overlook this handy tip.

0
66

Place a bottle in the toilet tank to effectively eliminate odors

First, you need to clean the bathroom, sanitize, and remove residue using cleaning agents and brushes as usual.

Then, take a bottle of mineral water. Fill the bottle with water about 2/3 full, then add a little toilet cleaner and stir well.

Use a sharp object to drill two small holes in the bottle body.

Open the toilet tank lid and place the water bottle inside, then close the lid and use it as usual.

When the water in the toilet tank is not moving, the water in the plastic bottle will not flow out. When you flush the water, the toilet cleaner can flow along and mix with the water in the toilet tank. This toilet cleaner has the effect of disinfection, deodorization, and insect prevention.

Therefore, every time you flush the toilet with toilet cleaner, the toilet will not have any odor, and the cost to make this solution is very cheap.

Placing a water bottle in the toilet tank helps save water

You need to prepare a large plastic bottle (or two glass beer bottles) and some pebbles or sand.

Lift up the toilet tank lid.

Pour the filled beer bottle into the toilet tank. Because the beer bottle is made of glass and contains water inside, its weight is quite heavy, enough to ensure that they do not float on the water surface. You just need to place 2 bottles into the toilet tank vertically.

If using a plastic bottle, you should put some pebbles or sand into the bottle. Then fill the bottle with water and tightly close the cap. Put the plastic bottle into the water tank of the toilet. If the plastic bottle is not floating, it is fine.

In reality, each toilet tank can hold from 3-6 liters of water. However, the amount of water flushes after using the restroom is usually more than normal, causing waste. With this method, when placing beer bottles/plastic bottles in the toilet tank, the volume of the bottle will replace some of the water in the tank and save a significant amount of water.

To ensure that the toilet is always clean and not clogged, you should avoid throwing waste such as food paper, cigarette butts, or leftover food in the toilet.

To clean and eliminate odors from the toilet, besides using cleaning agents, you can use some readily available ingredients in the house that are safe for health:

– Use vinegar: Vinegar has the ability to eliminate odors and clean very effectively. You just need to pour vinegar directly into the areas with stains and scrub with a brush to clean.

– Use lemons: You can use about 3 squeezed lemons and pour the juice into the toilet. Cover the toilet lid and leave it like that for at least an hour before flushing the water. Doing this ensures that the bathroom will no longer have any unpleasant odors.

Source: Khoevadep

You may also like

“Discover the Quick and Simple Solution to Eliminating Unpleasant Smells from Your Clothes”

Are you struggling with how to get rid of unpleasant odors that linger in your clothing, like smoke, grilled meat, or cooking oil? If so, then read on for some helpful advice on how to easily remove those pesky smells!

Discover the Benefits of Scented Paper in Clothes Dryers

Are you looking for an easy way to keep your clothes smelling fresh? Look no further and discover how to use scented paper for dryers to keep your clothes smelling great!

“How to Clean a Sanaky Refrigerator Easily and Safely in 5 Steps”

Are you struggling to keep your Sanaky refrigerator stain and odor free? If so, you’re in luck! With this article, we will provide you with tips and tricks for effectively cleaning your fridge so you can extend its shelf life.

14 Tips to Optimize Your Washing Machine for Energy and Water Conservation

Are you looking for ways to save energy and water at home? Discover effective methods for using washing machines and make your household more efficient.

Surprising Advantages of Tea Bags

Most Vietnamese are a lot familiar with drinking tea, and in keeping up with modern tastes, the industry has manufactured tea bags for convenience. Whilst making a cup of tea using a tea bag is easy and quick, people are also discarding the bags without recognizing their many potential benefits. This is unfortunate, as these tea bags can be used in a variety of ways which would totally not be wasteful.

Frequently asked questions

A plastic bottle holder is a device that can be attached to the toilet tank to hold a plastic bottle filled with water. This allows for a fresh, clean, and water-saving flush.

The bottle holder utilizes the water stored in the bottle to provide a powerful flush, while also preventing waste and saving water. It is easy to install and use, and can be a great way to conserve water and reduce your environmental impact.

There are several advantages to using a plastic bottle holder for your toilet tank. Firstly, it helps to keep your toilet fresh and clean by using a new bottle of water for each flush. This also saves water, as the bottle provides an additional source of water for the flush, reducing the amount of water needed from the tank. Additionally, it is a cost-effective and environmentally friendly solution, as it reduces water waste and can help to prolong the life of your toilet tank and plumbing system.

Installing a plastic bottle holder is a simple process. The holder can be easily attached to the side or top of your toilet tank using the provided adhesive strips or screws. Once installed, simply fill a plastic bottle with water and insert it into the holder, ensuring that the bottle is secure and won’t fall out. You can now use the water in the bottle for a fresh and clean flush.

To ensure optimal performance and longevity of your plastic bottle holder, it is important to regularly clean and maintain it. Empty and refill the bottle with fresh water every few days to prevent stagnation and the buildup of bacteria. Additionally, check the bottle holder periodically to ensure that it is securely attached to the toilet tank and that the bottle is firmly in place. With proper care, your plastic bottle holder can provide a long-lasting, water-saving solution for your toilet.