Why should you turn on the heater before entering the bathroom? Many houses use it during winter, but not everyone knows.

During chilly days, a heater provides warm, cozy atmosphere that ensures the well-being of every family member.

0
158

In recent years, during the winter, a series of heating devices, serving the increasing temperature demand in rooms, indoors, have emerged and gained popularity. One of them can be mentioned as a device called a heating lamp, often installed inside bathrooms, toilets, especially in families with elderly or young children.

However, on a household appliance sharing forum, many users wonder that despite turning on the heating lamp, the device does not seem to bring about obvious effectiveness. To explain this, experts say that it is possible that families have overlooked a small but extremely important step when using the heating lamp. That is to turn on the device a few minutes before entering the bathroom.


The heating lamp is a device installed in the bathroom, toilet of many households (Illustration)

Why should you turn on the heating lamp before entering the bathroom?

Experienced experts in the production and distribution of heating lamps give advice that it is best for users to turn on the heating lamp about 3 minutes before entering the bathroom. This action will help warm the entire space evenly, thereby optimizing activity effectiveness, providing warmth, and protecting human health, especially on very cold days.

The operating principle of the heating lamp is based on the principle of bulbs, which can be halogen bulbs or infrared bulbs. When turned on, current is supplied to the device, light from the bulbs will appear instantly, but the temperature of the bulbs at this time has not reached the optimal level, the warmth has not been spread throughout the space yet.


Turning on the heating lamp 3 minutes before entering the bathroom will help optimize warming of the space (Illustration)

►Remember: TURN ON 3 MINUTES before entering the bathroom.

In addition to turning on the heating lamp before entering the bathroom, users should also choose devices based on the usage space. Dien May Xanh – one of the famous electronics supermarkets in Vietnam – commented that whether halogen heating lamps or infrared heating lamps, the devices will provide the best heat dissipation in spaces from 15-20m2 depending on the capacity of the device. Therefore, if the bathroom and toilet area is too large, users should balance the position of installation for the lamps to be most reasonable, serving the heating needs in winter in the best way.

Some methods of using heating lamps safely and effectively

Below are some other suggested methods to help the use of heating lamps in families in winter be effective and safe. Families who have equipped and used the heating lamps can refer to them.

1. Avoid turning on the heating lamp for too long

As a heating device with a large heat output, experts advise users to absolutely avoid turning on the heating lamp for too long, even all day. The recommended duration for turning on the heating lamp is around a maximum of 30-40 minutes. After this time, turn it off so that the device has time to rest and reduce the heat.


Turning on the heating lamp for too long can cause the device to be overloaded, leading to burnout (Illustration)

Leaving the heating lamp operating for too long can potentially cause the device to be overloaded, leading to a higher risk of combustion, posing a danger to users or reducing the lifespan of the device. In addition, with halogen heating lamps, using them for too long will also cause dryness and cracking of the skin.

►Remember: 30-40 MINUTES is the recommended maximum time for turning on the heating lamp.

2. Minimize direct contact of the heating lamp with water

Mainly used in regularly humid environments such as bathrooms, toilets, most types of heating lamps nowadays have been equipped with relatively waterproof properties. However, to ensure the highest possible safety for the device and users, experts still advise minimizing direct contact of the heating lamp with water, especially in the bulb and socket areas, wires.

To achieve this, users should choose a suitable position for installing the heating lamp, away from the water tap, showerhead. Many technicians suggest that the ideal position for installing the heating lamp is about 1.8-2m high, higher than the showerhead. This is the safest distance, helping the device to maximize power, while minimizing the risk of water splashing. Do not place other objects near the heating lamp, especially flammable objects such as clothes.


The heating lamp should be minimized in contact with water (Illustration)

►Remember: Install the heating lamp HIGHER than the showerhead.

3. Clean and maintain the heating lamp regularly

Very few users pay attention to the fact that heating lamps also need regular maintenance and cleaning. Regarding cleaning, it can be done simply by using a clean dry cloth to wipe off dirt on the heating lamp and other parts of the device. As for maintenance work, to ensure the highest safety possible, it is best to seek assistance from professional units.

During maintenance, any malfunctions of the device will also be detected and repaired in a timely manner, thereby minimizing risks during use. Users should maintain the heating lamp at least once a year before each peak season.


The heating lamp also needs maintenance, inspection, regular cleaning (Illustration)

►Remember: MAINTAIN the heating lamp at least once a year.

4. Choose to buy quality heating lamps

When making a purchase, users must carefully check the manufacturing or distribution brand of the device and choose reputable names with clear warranty policies. Cheap devices may have changed the safety structure, reducing the quality and operational effectiveness, with a higher risk of combustion and shorter lifespan.

In addition to the brand, users can also look at a detail on the device to select a quality heating lamp. That is a product labeled with a conformity marking (CR). The marking shows that the product has been tested for quality safety in accordance with the regulations of the National Technical Standards for Electrical and Electronic Equipment Safety issued by the Ministry of Science and Technology.

According to Doi song Phap luat

You may also like

Explore 12 Amazing Destinations for Biking Trips

Unlock Vietnam in a brand new way with an exciting biking tour! Discover the stunning beauty of the country with Dien May XANH’s top 12 must-see destinations. From sweeping plains to clear blue beaches and mountainous vistas – experience all the sights with your own personal cycling tour. Find your ideal route and set out for an adventure today!

How to Properly Use and Maintain a Blender

In the summer heat, cool smoothies can be quickly prepared with the help of a blender. To ensure it works well and lasts for many years, with good maintenance and regular cleaning, the blender should be well-taken care of.

“How to Avoid Common Mistakes while Charging Your Phone Battery”

Are you sure you’re charging your phone correctly? Learn about the 10 most common mistakes people make when trying to keep their phones powered up and how to avoid them with this informative article. Check it out now!

How to Cut Down on Fuel Usage When Cooking

Families across the nation are striving to find ways to maximize their cost savings while still guaranteeing safety when utilizing a gas stove.

Securing Home and Family with Rolling Shutters

If you are a homeowner with a rolling door, it is important to take the necessary steps to keep your family safe. Here we will look at how you can maintain the functionality and safety of your rolling door through proper use and care.