Panasonic Washing Machine Error H12: Causes and Solutions

Panasonic washing machine error H12 can be fixed at home if you know how. Let’s learn about the causes of the error as well as the simplest way to fix it with FPT Shop.

Why should you choose to use a Panasonic washing machine?

Panasonic washing machines have a luxurious design and integrate many modern features. This is one of the product lines that is highly appreciated for its quality in the Vietnamese market. Here are the reasons why you should choose to use a Panasonic washing machine:

• The exterior design is sophisticated and luxurious, contributing to highlighting the space of your home.
• Save up to 41% water and 71% electricity thanks to the use of advanced Inverter technology.
• Stainmaster technology combined with the 8-wing Active Wave washing tub helps promote the washing process of the machine, making it easy to remove stains on clothes.
• Panasonic washing machines also have many modern features such as: automatic washing tub cleaning mode, hot water washing clothes mode…

What is Panasonic washing machine error H12?

In fact, error H12 Panasonic washing machine is an error caused by the washing machine lid not being closed when it is operating. It can also be an error caused by a damaged anti-vibration device or switch. Error code U12 and H12 of Panasonic washing machines are the same type. If you encounter this error, your washing machine will stop working, the light will flash and the error code H12 (with new model washing machines), U12 (with old model washing machines) will be displayed on the screen.

Causes and how to fix error H12 Panasonic washing machine

Cause

Some causes of Panasonic washing machine error H12 include:

• Due to a broken connection between the switch and the circuit.
• The connecting wire to the switch to the circuit board is burnt or broken.
• The lid of the Panasonic washing machine door has not been closed tightly by the user.
• Due to the Panasonic washing machine being damaged anti-vibration switch or broken door switch.
• The contact surface of the washing machine switch is rusted.

How to fix

Accordingly, when you see error H12 Panasonic washing machine, you should apply the method of fixing the anti-vibration switch or fixing the error caused by the switch. You can fix Panasonic washing machine error H12 at home with the following instructions:

• Check if the door of your washing machine is closed. Next, you start the machine and monitor whether the entire operation of the machine is stable or not.
• In case the Panasonic washing machine shakes violently during operation and then hits the anti-vibration lever, reports error H12, then you adjust the feet of the washing machine for balance. If you still see the washing machine reporting error H12, continue to check if the machine door or switch is broken and replace it with a new one.

• After that, you check the contact points between the 2 copper sheets and the anti-vibration switch. When you see that this part is dirty or dusty, remove the anti-vibration switch and clean it.
• If you have performed all the above steps but still cannot fix the Panasonic washing machine error H12, it is possible that your washing machine’s circuit board is broken. To extend the life of the product as well as ensure safety when using it, contact the repair and warranty center immediately for support.

Notes when fixing Panasonic washing machine error H12

• Disconnect the power before checking and repairing.
• Use the appropriate repair tools to avoid damaging the washing machine.
• Refer to the washing machine user manual from the manufacturer for more details.