Panasonic Washing Machine Error H12: Causes and Solutions
Panasonic washing machine error H12 can be fixed at home if you know how. Let’s learn about the causes of the error as well as the simplest way to fix it with FPT Shop.
Why should you choose to use a Panasonic washing machine?
Panasonic washing machines have a luxurious design and integrate many modern features. This is one of the product lines that is highly appreciated for its quality in the Vietnamese market. Here are the reasons why you should choose to use a Panasonic washing machine:
- The exterior design is sophisticated and luxurious, contributing to highlighting the space of your home.
- Save up to 41% water and 71% electricity thanks to the use of advanced Inverter technology.
- Stainmaster technology combined with the 8-wing Active Wave washing tub helps promote the washing process of the machine, making it easy to remove stains on clothes.
- Panasonic washing machines also have many modern features such as: automatic washing tub cleaning mode, hot water washing clothes mode…
What is Panasonic washing machine error H12?
In fact, error H12 Panasonic washing machine is an error caused by the washing machine lid not being closed when it is operating. It can also be an error caused by a damaged anti-vibration device or switch. Error code U12 and H12 of Panasonic washing machines are the same type. If you encounter this error, your washing machine will stop working, the light will flash and the error code H12 (with new model washing machines), U12 (with old model washing machines) will be displayed on the screen.
Causes and how to fix error H12 Panasonic washing machine
Cause
Some causes of Panasonic washing machine error H12 include:
- Due to a broken connection between the switch and the circuit.
- The connecting wire to the switch to the circuit board is burnt or broken.
- The lid of the Panasonic washing machine door has not been closed tightly by the user.
- Due to the Panasonic washing machine being damaged anti-vibration switch or broken door switch.
- The contact surface of the washing machine switch is rusted.
How to fix
Accordingly, when you see error H12 Panasonic washing machine, you should apply the method of fixing the anti-vibration switch or fixing the error caused by the switch. You can fix Panasonic washing machine error H12 at home with the following instructions:
- Check if the door of your washing machine is closed. Next, you start the machine and monitor whether the entire operation of the machine is stable or not.
- In case the Panasonic washing machine shakes violently during operation and then hits the anti-vibration lever, reports error H12, then you adjust the feet of the washing machine for balance. If you still see the washing machine reporting error H12, continue to check if the machine door or switch is broken and replace it with a new one.
- After that, you check the contact points between the 2 copper sheets and the anti-vibration switch. When you see that this part is dirty or dusty, remove the anti-vibration switch and clean it.
- If you have performed all the above steps but still cannot fix the Panasonic washing machine error H12, it is possible that your washing machine’s circuit board is broken. To extend the life of the product as well as ensure safety when using it, contact the repair and warranty center immediately for support.
Notes when fixing Panasonic washing machine error H12
- Disconnect the power before checking and repairing.
- Use the appropriate repair tools to avoid damaging the washing machine.
- Refer to the washing machine user manual from the manufacturer for more details.
Conclusion
Hopefully the information shared about the cause and how to fix Panasonic washing machine error H12 from FPT Shop will be useful to you. Usually this error will have some main reasons such as above, so you can calmly handle it step by step. Don’t forget to follow us for more updates on the latest technology as well as useful tips and tricks in life!
- What is a steam washing machine? Should I use it for my family? Information you need to know about steam washing machines
- Detailed and complete symbols on Bosch washing machines help you use them correctly and increase their lifespan
- A broken connection between the switch and the circuit.
- The connecting wire to the switch or circuit board is burnt or damaged.
- The washing machine lid has not been closed tightly.
- A faulty or broken anti-vibration switch or door switch.
- Rust on the contact surface of the washing machine switch.
- Ensure that the door of your washing machine is closed securely. Start the machine and observe if it operates stably.
- If the machine vibrates excessively and triggers the anti-vibration lever, adjust the feet of the washing machine for better balance. If the error persists, check if the door or switch is damaged and replace it if necessary.
- Inspect the contact points between the copper sheets and the anti-vibration switch. Clean or replace the switch if it is dirty or dusty.
- If the above steps do not resolve the issue, the problem may lie with a faulty circuit board. In this case, contact a repair service or the warranty center for further assistance.