The Unexpected Halt: Unveiling the 0xc0000142 Conundrum

How to Fix The Application Was Unable to Start Correctly 0xc0000142? You can consider and apply many ways, such as update outdated tools, fix corrupted files, etc. Follow the article for detailed instructions.

By
Administrator
-
0
151

When using a computer, you may encounter issues where certain software or applications fail to launch, displaying the error message “The application was unable to start correctly (0xc0000142).” In this article, FPT Shop will guide you through several methods to fix this issue.

Understanding the 0xc0000142 Error: Causes and Consequences

Causes

The 0xc0000142 error is typically associated with issues related to program or software installation. It usually occurs when the installation files are corrupted, causing the system to be unable to locate the necessary files and triggering the error message as a warning.

Consequences

Fortunately, the 0xc0000142 error does not typically cause severe issues or damage to the software or programs running on your computer. Instead, it serves as a notification to inform users about the specific problem, temporarily preventing the affected software or application from launching.

5 Simple Troubleshooting Methods

Here are five helpful suggestions to fix the “The application was unable to start correctly 0xc0000142” error:

1. Restart Your Computer

Restarting your computer is often the first recommended step when encountering errors. This is because computers can sometimes experience lag or freezing, causing issues with accessing certain files required for program initialization, resulting in error messages.

2. Modify the LoadAppInit_DLLs File Value

Quick Guide:

Press Windows + R > Type Regedit and click OK > Locate the LoadAppInit_DLLs file by navigating to Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows > Change the Value data to 0 > Click OK to save.

Detailed Guide:

Step 1: Open the Run dialog box by pressing Windows + R. Type Regedit into the box and click OK.

Step 2: The Registry Editor dialog box will appear.

Step 3: Locate the LoadAppInit_DLLs file by navigating to Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows

Step 4: Right-click on the LoadAppInit_DLLs file > A dialog box will appear > In the Value data field, change the value to 0 > Click OK to save the changes.

3. Uninstall Recently Installed Applications

Quick Guide:

Go to Start > Choose Settings > Select Apps > Uninstall the most recently installed apps under Apps & features.

Detailed Guide:

Step 1: Go to Start > Click on Settings to open software and application settings.

Step 2: Select Apps.

Step 3: Choose Apps & features. You will see a list of recently installed applications. Uninstall any software or applications installed recently to fix the 0xc0000142 error.

4. Enable Compatibility Mode

Quick Guide:

Right-click on the problematic application > Click Properties > Select Compatibility > Choose Run compatibility troubleshooter > Select Try recommended settings > Choose Test the program > Click Next > Select Yes, save these settings for this program > Check the box for Run this program in compatibility mode for > Choose a compatible operating system > Check the box for Run this program as an administrator > Click Apply > Click OK to save.

Detailed Guide:

Step 1: Right-click on the application with the error and select Properties.

Step 2: A dialog box will appear > Select Compatibility > Choose Run compatibility troubleshooter.

Step 3: Select Try recommended settings.

Step 4: Click on Test the program to attempt to run the program with the 0xc0000142 error. If successful, the dialog box will close automatically > Click Next to continue.

Step 5: Select Yes, save these settings for this program.

Step 6: Check the box for Run this program in compatibility mode for > Choose a compatible operating system, such as Windows 7 or another suitable version.

Step 7: Check the box for Run this program as an administrator > Click Apply to apply these settings > Click OK to save.

5. Use the System File Checker Tool

Quick Guide:

Go to Start > Choose Windows PowerShell > Click Yes to access Windows PowerShell > Type the command sfc /scannow > Press Enter to fix the “The application was unable to start correctly 0xc0000142” error.

Detailed Guide:

Step 1: Click on Start > Choose Windows PowerShell or type cmd to open the Command Prompt for Windows XP/Windows 7.

Step 2: A notification will appear asking for permission to access Windows PowerShell > Click Yes to proceed.

Step 3: Type the command sfc /scannow > Press Enter and wait for the computer to fix the error. Once completed, restart the affected program or application.

Conclusion

We hope that after following the instructions in this article, you will successfully fix the “The application was unable to start correctly 0xc0000142” error.

At FPT Shop, you can find a wide range of laptop options from various brands, catering to different budgets, from affordable to high-end. We not only guarantee quality and durability but also offer competitive prices to meet your needs and budget.

Shop for authentic laptops for students, office workers, and more here:

Frequently asked questions

This error message typically indicates an issue with the installation of a program or software. It occurs when the installation files are corrupted, preventing the system from locating the necessary files and resulting in the error message.

The 0xc0000142 error is usually associated with problems related to program or software installation. It commonly occurs when the installation files are corrupted.

Thankfully, this error does not typically cause severe issues or damage to your computer or software. It serves as a notification to inform users of the specific problem and temporarily prevents the affected software from launching.

There are several troubleshooting methods you can try. First, restart your computer as it can help resolve any lag or freezing issues. You can also modify the LoadAppInit_DLLs file value, uninstall recently installed applications, enable compatibility mode, or use the System File Checker Tool to address the problem.

Press Windows + R, type ‘Regedit’ and click OK. Locate the LoadAppInit_DLLs file in the Registry Editor by navigating to Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows. Change the Value data to 0 and click OK to save.

Go to Start, choose Settings, and select Apps. Under Apps & features, uninstall any recently installed applications. This will help resolve the 0xc0000142 error.

Right-click on the problematic application and select Properties. Choose the Compatibility tab and run the compatibility troubleshooter. Select ‘Try recommended settings’ and test the program. If successful, save these settings and choose a compatible operating system. Also, select ‘Run this program as an administrator’ and click Apply, then OK.

Go to Start and choose Windows PowerShell. Click Yes to access it, then type the command ‘sfc /scannow’ and press Enter. This will help fix the ‘The application was unable to start correctly 0xc0000142’ error.

RELATED ARTICLESMORE FROM AUTHOR