Fix Simple Home Method for iPhone Stuck on Apple Logo

If in case the iPhone is stuck at the Apple logo flashing. Let’s follow the article below to understand the possible causes that can cause the apple to hang from which to handle quickly for your phone.

1. What is the bug when iPhone is stuck at the Apple logo?

iPhone stuck with apple is one of the issues that often appear on jailbroken devices, meaning the device has been interfered with the iOS operating system to overcome the limitations allowed by Apple. When encountering this error, the device’s screen will only display the Apple logo icon, continuously flashing several times, and the device will not work normally. The machine will not be able to perform any operations on the screen or even be unable to charge. This will make you even more worried about your phone.

2. Causes that make iPhone stuck at Apple logo flashing

The causes of the iPhone stuck at the flashing Apple logo are very different. The following section will provide some of the most common causes you can refer to in order to avoid your devices.

2.1. Causes due to hardware devices

If your iPhone encounters the situation of sticking to the Apple logo flashing, it is likely that the hardware of the machine has encountered a serious problem. This is one of the least common causes, but cannot be ignored when the machine encounters this problem.

Hardware of iPhone includes components such as battery, camera, sensors, screen, speakers and many other parts. These parts may be damaged or have errors due to falls, collisions, accidental water or overheating.

In addition, the condition of being stuck in Apple on iPhone may be due to the phone battery. The old iPhone battery after a long time of operation will no longer guarantee the necessary quality for the machine to work well. Or it may be due to a technical malfunction of the iPhone battery no longer receiving power as before.

2.2. Software error

This is one of the common causes that make the iPhone logo blink, because your iPhone is running too many applications at the same time, making the device overload for many hours and getting hot.

This has caused your phone to conflict with software. When overloaded, the device will automatically shut down to protect other hardware of the machine.

2.3. Due to issues with operating system updates

In addition to the reasons mentioned above, assuming the iPhone logo is blinking, it is an error that may occur during the process of upgrading the new iOS operating system for your device. This situation occurs because the updating process is interrupted, lost internet connection or you did not follow the instructions correctly to update.

3. How to fix iPhone stuck at blinking Apple logo

After understanding the common causes of apple hanging, you can refer to some ways to fix the iPhone stuck at flashing apple logo below to handle quickly at home.

3.1. Restart iPhone

You can try restarting your iPhone by following these steps:

• For models from iPhone 8 and newer: Press the Volume Up button quickly, then go to the Volume Down button > hold the power button from 10-30 seconds until the iPhone screen restarts.
• For iPhone 7 and 7 Plus: Hold down the power button for 10-30 seconds and wait for the iPhone screen to restart.
• For models from iPhone 6s and below: Hold down both the Home button and the Volume Up button for 10-30 seconds for the iPhone to restart.

3.2. Use DFU mode to restore iPhone to its original state

You can use DFU mode to restore iPhone to its original state like when you first bought the machine. This is a quick restore mode by erasing all data and reinstalling the machine’s operating system. One note to note is that the DFU mode will completely erase the data and cannot be restored. Therefore, it can solve the problem of iPhone stuck at apple blinking, because the machine has returned to its original state. If you have considered carefully, here are the steps for you to use this DFU mode:

• Step 1: Prepare a USB cable> connect iPhone to the computer via cap. Then, you open iTunes on the computer.
• Step 2: Quickly press the Volume Up and Volume Down buttons one after another, then hold down the Power button until the screen turns off completely. Next, continue to hold down the Volume Down button for 5 seconds.
• Step 3: If you follow the correct instructions, you will see a USB cable and iTunes icon appear on the screen. This means that you have successfully accessed DFU mode.

• Step 4: On the screen, press the OK button to turn off the iTunes notification. Then click Restore iPhone button to start the process of restoring the operating system.

4. Important notes to fix iPhone stuck at Apple

4.1. Store important data before performing

Data loss is a common problem when the device is suddenly affected by unexpected errors such as being stuck in an Apple state. So before proceeding with the steps to fix this error, please remember to back up the data to avoid losing important information.

The way is very simple, you can use iCloud or other dedicated software to store data on the iPhone. This operation will help you keep important information on your device when you have to restore the factory settings or upgrade the operating system to a newer version.

4.2. Use dedicated software

To fix the iPhone logo blinking error, you can consider using dedicated support software such as Tenorshare ReiBoot, iMyFone Fixppo, or Dr.Fone – System Repair.

These software have the advantage of being able to reinstall the machine without losing data, helping you to bring the machine back to Recovery Mode or DFU quickly. However, when using these software, the Find My iPhone feature on your device will be disabled and your iPhone will need to connect to the computer via a USB cable.

4.3. Take your iPhone to an authorized warranty center

If you have tried the above two methods but there is no promising signal, it is likely that your phone has encountered hardware errors. Hardware errors are particularly serious errors, so to ensure safety, you should take your iPhone to Apple’s authorized warranty center for testing.

You may also like

An easy guide to enabling birthday notifications on Zalo that not everyone knows

Many Zalo users are interested in how to enable birthday notifications. This feature allows you to easily receive notifications about the birthdays of your friends and loved ones, as well as vice versa. So, how do you enable birthday notifications? Let’s follow along with FPT Shop in the article below to find out more details.

Discover the reasons behind iPhone’s blank screen and try these 4 simple troubleshooting methods now!

White screen error on iPhone can be caused by various reasons such as loose cables, damaged screen, water damage, and even software issues. Many users have encountered this problem but do not know how to fix it. Let FPT Shop guide you now!

Restore iPhone with iTunes: The Foolproof Guide for Seamless Success

Restore your iPhone with iTunes to quickly factory reset it, fix common errors, and regain a smooth user experience. For a step-by-step guide on how to restore your iPhone using iTunes, refer to this article.