There is a wide range of air fryers available in the market, with prices varying significantly. A quick browse through online shopping platforms will reveal products priced below VND 1 million, while others can cost tens of millions of dong.

For the average consumer, there is no need to splurge on an air fryer as long as the product ensures safety.
It’s important to note that air fryers operate at very high temperatures. The material of the fryer also affects the quality and safety of the product. Low-quality air fryers can pose dangers during use and negatively impact the user’s health.
Therefore, it’s crucial to inspect your air fryer. If you find any products that do not meet quality standards, dispose of them immediately to protect your health and your family’s well-being.
This type of air fryer should be discarded immediately
Among air fryers, the inner pot is usually made of plastics such as PP, PS, or ABS. While all three types of plastic have good heat resistance, their heat tolerance levels differ.
Specifically, PP plastic has a melting point of around 160°C but should only be used at temperatures below 100°C. PS plastic has a melting point above 100°C; however, the recommended usage temperature is below 90°C. Lastly, ABS plastic has a melting point of approximately 170°C but should ideally be used at temperatures below 86°C.
During operation, the temperature in the air fryer often exceeds these recommended levels. To enhance the heat resistance of the plastic, some manufacturers may add additives, resulting in the use of inferior-quality plastic for the inner pot.
The use of low-quality plastic lining in air fryers can pose several health hazards. When heated, the surface of this material can surpass its endurance limit, leading to the emission of toxic substances such as benzene and toluene.
You may detect a faint plastic smell when operating the appliance. These toxins not only contaminate food but can also cause severe health issues and even increase the risk of cancer if exposed to them over an extended period. Therefore, consumers must exercise caution when selecting an air fryer to safeguard their health and their families’ well-being.
2 recommended materials for the inner pot of an air fryer
When purchasing an air fryer, opt for one that uses one of the following two materials for the inner pot:
– Stainless steel inner pot: Stainless steel is not only safe but also does not release harmful substances. Many high-end air fryers on the market today use stainless steel inner pots.
– Teflon-coated inner pot: This is a common type of inner pot with good heat resistance. If used correctly, without exceeding 260°C, a Teflon-coated pot will be safe. However, users should be aware that over time, the Teflon coating may peel or scratch and will need to be replaced promptly.
Lastly, it is advisable to steer clear of cheap, unbranded air fryers as they often fail to meet food safety standards. Prolonged use of such products can lead to severe health risks due to the generation of toxic substances when heated.
A Prosperous New Year: 3 Zodiac Animals Blessed by the God of Wealth in the First Lunar Month
The new year brings new opportunities, and according to Feng Shui experts, January 2024 will be an exceptionally lucky month for three zodiac signs. These fortunate individuals will find themselves blessed by the God of Wealth; their luck will be as vibrant as red, and their finances will flourish like a flowing river. Achieving wealth will be well within their grasp.