Identifying Causes of CF Error on Samsung Air Conditioner Troubleshooting

Having trouble with your Samsung air conditioner displaying the CF error? This article provides an easy to follow guide on how to troubleshoot this issue. Commonly, the CF error is caused by excessive dust and debris build up in the air conditioner. Follow the steps outlined here to easily resolve the problem and get your air conditioner running optimally again!

0
409

CF Error of Samsung Air Conditioner

The CF error is a filter grid warning of the indoor unit in Samsung air conditioners. It indicates that the filter grid needs to be cleaned due to excessive dust. When this error occurs, the CF light on the unit will notify you.

The CF error is usually encountered when the air conditioner is overloaded or when it accumulates too much dust. However, it is a common error and can be easily resolved by cleaning the filter grid of the indoor unit. Once the filter grid is cleaned, the error will stop displaying and the air conditioner can be used normally.

CF error displayed on the air conditioner

CF error displayed on the air conditioner

Causes of CF Error in Samsung Air Conditioner

The CF error in Samsung air conditioners is mainly caused by a malfunctioning high-pressure switch or excessive dust accumulation on the indoor unit.

CF error is a filter grid warning of the indoor unit

Easy cleaning of the filter grid at home

How to Fix CF Error in Samsung Air Conditioner

Clean the Filter Grid Inside the Indoor Unit

  1. Step 1: Turn off the circuit breaker and all electrical systems related to the air conditioner for safety during cleaning.
  2. Step 2: After turning off the power, carefully remove the filter grid from the indoor unit, avoiding damage to the edges of the unit.
  3. Step 3: Use a soft cloth or brush to gently remove dust.
  4. Step 4: Clean the filter thoroughly and let it dry in a well-ventilated area.
  5. Step 5: Reinstall the filter in its original position.

Filter grid before and after cleaning

Filter grid before and after cleaning

Reset Filter on Samsung Air Conditioner Remote

After cleaning the filter grid and reinstalling it in its original position, you can start the air conditioner to make it work normally.

The next step is to troubleshoot the error by adjusting the settings on the air conditioner remote to reset the cleaning reminder. Follow these simple steps:

  1. Step 1: Press the Options button on the remote.

Press the Options button on the remote

  1. Step 2: Select the Right arrow button.

Select the Right arrow button

  1. Step 3: Select Filter Reset on the remote screen.

Select Filter Reset on the remote screen

  1. Step 4: Select the SET button to confirm the setting.

Select the SET button to confirm the setting

  1. Step 5: After confirming, the Filter Reset light on the remote control screen will disappear, and the CF error light on the indoor unit screen will also disappear.

After confirming, the Filter Reset light on the remote control screen will disappear

If you have any questions or need further assistance, please leave your information below, and we will promptly address your concerns.