Water stains caused on the surface of wood like this are often referred to as water marks. Although in reality, it does not affect much in the use of furniture, but no one likes a table with old water marks.
Before starting to remove water stains on the wood surface, check the color of the stain. White water stains appear when moisture is trapped in the wood’s finish. The cleaning methods given will work the best with these types of stains. If the water rings are dark, the liquid may have penetrated the wood and you may need to repaint the entire surface. It is important to note that some long-lasting, tough water stains are best handled by skilled workers.
1. Remove water stains with mayo
A surprising fix for water stains comes from something you wouldn’t expect. The oil in mayonnaise helps change the moisture content of the water ring and removes any hazy residue from the wooden furniture. What you need to do is use a paper towel to dab mayonnaise on the stain and let it sit for a few hours or overnight. Then wipe off the mayo stain with a clean cloth and wipe again a few times to make the surface shine.
2. Combine vinegar and olive oil
Mix vinegar and olive oil in equal parts. Use a cloth soaked in the mixture on the water stain. Wipe along the wood grain until the stain is gone. The vinegar will help remove the stain, while the olive oil acts as a furniture polish. Then finish the process by wiping with a clean and dry cloth.
3. Use an iron
To remove water stains with an iron, start by placing a clean cloth on the stain. We recommend using plain cotton fabric without any printed or dyed patterns to avoid any transfer onto the surface. Also, make sure there is no water inside the iron, then set it on low temperature.
Once the surface of the iron is warm, place it quickly on the cloth over the water stain. After a few seconds, you can lift the iron and cloth to check the stain. If the stain is still there, repeat the steps until the stain is removed. This method is most effective for stains that are still damp rather than deeply set water stains, as it effectively evaporates the moisture on the surface.
4. Remove water stains with a hairdryer
This method is most effective for stains caused by fresh water. As soon as the water ring appears, go into the bathroom and grab a hairdryer.
Plug in the device and turn it on at the highest setting, then direct the hairdryer towards the stain, holding it until the stain disappears. Unplug the hairdryer. Finish by polishing the surface with furniture oil.
5. Use toothpaste
To fix discoloration from water, you’ll need white toothpaste and a cloth or paper towel. Apply a small amount of toothpaste to a clean cloth.
Then spread the toothpaste evenly on the stain and continue rubbing gently until the stain is completely removed. Lastly, clean off any residue with a cloth or paper towel.
Source: VOV
Ways to add color to your kitchen
Tips to eliminate bathroom odor
Discover Unusual Ironing Techniques to Improve the Appearance of Clothing
If you’re looking to achieve a pristine, wrinkle-free appearance to your clothes, then ironing is a must-have in any household. But are you aware of the different techniques and tricks out there that can help you save energy, maintain the life of your ironing board, and do a better job ironing? In this article, we’ll be unlocking the secrets to some of the best ironing hacks that you won’t find anywhere else.
Guide to Safe Ironing Practices: A Step-by-Step Approach
Using an iron correctly is a great way to ensure your garments look neat and presentable. However, it is important to take safety measures into consideration when handling an iron to minimize potential damage to garments and potential risks of fire or explosions. This article will discuss tips on proper handling of irons for maximum performance, safety and longevity.