Fruit juicer not working – Causes and troubleshooting tips

No matter what type of household appliance it is, it is prone to damage if used frequently and aggressively. In particular, with fruit juicers, this type of equipment sometimes stops working suddenly due to certain errors. Let's find out the causes and solutions for a non-functioning fruit juicer together with Điện máy XANH!

Administrator

28 October, 2023

176

1 Reasons why the fruit juicer is not working

Many people encounter the situation where the fruit juicer does not work after a period of use. This is a common case for those who frequently use the juicer with high frequency.

However, this may be due to a machine error, which can be fixed at home without the need for repair. Here are some reasons why the fruit juicer is not working.

There are many reasons why the fruit juicer cannot work normally

The fruit juicer is not connected to the power source

When the juicer is not working, first, you should check the power plug. Usually, users often forget to plug in the plug, leading to problems in the power transmission process.

In addition, a loose plug is also a common cause of the machine not working. Besides, you should ensure the voltage of the household is stable, ensuring the smooth and efficient operation of the machine.

Common issues with power plugs that cause the juicer to not work

The parts of the machine are not assembled correctly

The fruit juicer will have separate parts that need to be assembled to work. Therefore, the machine may not work if it is not properly assembled.

To fix this problem, users need to ensure that the machine is fully and correctly assembled. If you still don’t understand, you can refer to the accompanying instructions to do it correctly.

Incorrect assembly will also cause the machine to not work

The safety lock of the juicer is not tightly closed

Some types of fruit juicers are equipped with a lock system to ensure smooth operation and safety for users. Therefore, if the lock is not tightly closed, the machine will not work.

Therefore, users need to pay attention to check and close the locks on the machine before stopping using. This is one of the important points to note if you encounter the situation where the fruit juicer does not work.

The fruit juicer Midea MJ-JE35 is equipped with a lock system to ensure safety for users

The motor of the machine is damaged

Another reason why the fruit juicer does not work is that the motor is damaged. Using the machine for a long time can cause electrical and damage to the machine. From there, the device cannot operate smoothly and effectively as before.

If this happens, users should contact a repair shop for timely resolution and quick troubleshooting.

Users should check the motor of the fruit juicer when it is not working

The juicer has a burning smell

If you turn on the juicer and smell a burning smell, this is the case where the machine has a broken motor inside. The burning smell can come from electrical faults or motor burnout.

In this case, you should immediately unplug the power plug and check the machine. Then, you need to take the machine to a repair shop and should not continue to use the device, avoiding more serious explosions.

The fruit juicer may have a burning smell when the motor is short-circuited

The machine is stuck due to pulp or fiber of the juiced ingredients

A common cause of the juicer not working is that the user juices a large or hard amount of food that causes machine jamming due to pulp. Especially, this case often occurs with types of juicers that do not have a strainer pusher.

To fix this problem, you can choose the reverse rotation mode to release the fiber gradually. Then, you should clean the machine and continue to use it as usual.

In the case of a hard jammed machine, you have to disassemble the machine parts and directly remove the stuck ingredients before continuing to use.

The AVA AJ02 fruit juicer with sharp blades minimizes the problem of hard food jamming

The juicer is rusted

The fruit juicer is rusty also makes the machine unable to operate. This situation occurs because users do not understand how to preserve the machine after use.

To fix this problem, you should read the instructions carefully before operating the machine to avoid damage. Besides, the machine components will be well preserved if users pay attention to cleaning and storing the juicer after use.

The Panasonic MJ-CS100WRA fruit juicer is made of good quality plastic to prevent rusting

2 General considerations when using a fruit juicer

To avoid the machine being damaged and encountering problems during use, you should pay attention to the following issues:

Choose to juice appropriate types of food: When using the juicer, you should pay attention to using suitable types of food, not too hard, causing the blade of the machine to break.

Read the product instruction manual carefully: You should pay attention to reading the usage instructions to fully utilize the features of the machine, while avoiding unnecessary damage.

Check the juicer before using: Check the machine as well as the operation of the machine before use to ensure safety.

Attach the pulp tray and place a water collecting glass when using the machine: You should equip a food waste container and a juice collecting glass to increase convenience during the process.

Clean the machine regularly and properly: Clean the juicer regularly, before and after each use to ensure the health of users and increase the lifespan of the machine.

Frequently asked questions

There could be several reasons why your fruit juicer is not functioning properly. Some common issues include a clogged strainer, an overheated motor, a faulty power supply, or an improperly assembled machine. Basic troubleshooting tips include checking the power source, ensuring proper assembly, and cleaning or replacing the strainer.

If your juicer is clogged, first unplug the device and disassemble the parts. Soak the clogged components in warm water and use a small brush to gently remove any remaining fruit or vegetable matter. Reassemble the juicer and try using it again.

To prevent overheating, ensure that your juicer is not running continuously for extended periods. Give it breaks during extended juicing sessions, and always ensure that the machine is properly ventilated. Also, check that the fruit or vegetables you are using are not too hard or large, as this can put a strain on the motor.

If your juicer is not extracting juice effectively, the issue could be with the produce itself. Ensure that you are using ripe, fresh fruit or vegetables that are not too soft or too hard. Also, check the feeding tube and pusher to ensure they are not blocked, and confirm that the juicer is properly assembled.

Regular cleaning and maintenance are crucial for the optimal performance of your fruit juicer. Disassemble and clean all parts that come into contact with food after each use. Additionally, remember to lubricate the moving parts periodically, and always store the juicer in a dry and dust-free place when not in use.