Get Rid of Rust Stains with These Smart Tips for Shiny Tools

Using lemon and salt: Sprinkle some salt over the rusted area, then squeeze lemon juice onto it (use 1 tablespoon of lemon juice and 1/2 teaspoon of salt). Let the mixture sit for about 2-3 hours, then use a brush to scrub the rusted spot. You will see a noticeable decrease in the metal’s rust. Additionally, you can use lemon peels to rub on the rusted surface to avoid damaging the metal’s surface.

Removing rust with onions: Cut an onion into slices and use it to wipe off the rusty knife, the rust will disappear. This is a simple method to remove rust that not everyone knows. Give it a try, and it guarantees high effectiveness.

Rust stains can quickly damage your utensils (Illustration photo)

Removing rust with vinegar: If there are rust spots on your utensils, use vinegar to clean them, and the rust will disappear. For aluminum utensils with rust, you can soak them in vinegar water (the ratio of vinegar depends on the rustiness of the utensils). After soaking, scoop out the rusty utensils and rinse them clean, and they will shine like new. When copper utensils have rust, use a cloth soaked in vinegar with a little salt or ink fish bone powder to wipe it, and the rust will disappear.

Using baking soda: Sprinkle a little baking soda with some water on the rusty area, let it sit for about 3 hours, then use a brush to scrub the surface and rinse with cold water. The strong cleaning agent in baking soda will remove all those annoying rust stains.

Using vinegar: If your utensils have rust stains, use vinegar to clean them, and the rust will disappear. For aluminum utensils with rust, you can soak them in vinegar water (the ratio of vinegar depends on the rustiness of the utensils). After soaking, scoop out the rusty utensils and rinse them clean, and they will shine like new. When copper utensils have rust, use a cloth soaked in vinegar with a little salt or ink fish bone powder to wipe it, and the rust will disappear.

Illustration photo

Using potatoes and dish soap: Cut a potato in half and immerse the cut side in a dish soap solution, then place the potato on the surface of the rusted metal and leave it for a few hours. After that, gently rub the potato on the rusted area and use a sponge to clean the material. This method is to create a mixture that dissolves the rust on the surface of the metal.

Using abrasive tools: This method requires lubricating oil, remove rust by scraping it off. Use an electric grinder or fine sandpaper to rub on the rusted surface, and the rust will be corroded and disappear from the metal surface.

Candle wax: The candle method is often used to remove rust stains on ironing boards and irons. Just rub the candle on the surface of the iron, then turn on the iron and press it against a soft cloth or toweling. The heat combined with the candle will effectively remove the rust stains.