After using up the contents inside bottles and jars, you can keep them for reuse, saving money and protecting the environment. However, these containers often have labels that need to be removed before reusing to avoid confusion and ensure aesthetics and suitability for the intended use.
However, removing the outer label of the bottle is not easy. If you don’t know how, the label can be torn and leave messy adhesive residue.
Here are some tips to help you solve this problem.
Use a hairdryer
A hairdryer can generate heat to melt the glue, making it easier to peel off the labels from the bottle. You can use the hairdryer at the highest heat setting and direct the dryer head towards the area with the label for about 1-2 minutes. The hot air from the dryer will melt the adhesive layer, and you can simply peel off the label gently.
Note that this method is only suitable for glass bottles and heat-resistant materials. Plastic bottles that cannot withstand high temperatures may not be suitable for this method.
After heating, you need to quickly peel off the label as the adhesive layer will quickly harden when cooled.
If you don’t have a hairdryer, you can place the glass bottle in direct sunlight for a few hours to let the adhesive layer melt and remove the label.
Use baking soda and cooking oil
A mixture of baking soda and cooking oil can create a slippery surface that makes it easy to peel off the adhesive labels.
Mix 1 part baking soda with 1 part cooking oil. Apply this mixture to the surface of the label and leave it for 10-30 minutes. When the label has softened, use a cloth or a gentle dish scrubber to peel off the label.
Use denatured alcohol, rubbing alcohol, lighter fluid, or cooking oil
These solutions soften the adhesive, making it easy to peel off the sticky labels on the bottles.
Apply a layer of the solution to the surface of the label and let it sit for 5-7 minutes. This solution will soften the label and make the adhesive lose its stickiness. Note that when using these solutions, you should wear gloves and a mask to avoid inhaling unpleasant odors from the solutions.
Keep in mind that alcohol evaporates quickly, so you should peel off the label quickly.
Use aromatic balm
Aromatic balm contains essential oils that can soften the adhesive, helping the label to come off easily. Simply apply a few drops of aromatic balm to the label, spread it evenly, and then peel off the label. Wash the bottle with soap to remove any residue from the adhesive and aromatic balm.
Use nail polish remover
Nail polish remover also has the ability to alter the adhesive, making it lose its original stickiness. Apply nail polish remover to the label and let it sit for about 10 minutes, then use a brush to remove the label.
Use hot water and dish soap
Prepare a bowl of hot water and add some dish soap, stirring until it dissolves. Place the glass bottle in the water for about 10-30 minutes. The label must be submerged in water.
After that, take the bottle out of the water and use a blunt knife to gently scrape off the label. Under the influence of hot water, soap, and the scraping action of the knife, the label and adhesive will be cleaned off.
Source: Thời báo vhnt
Easiest Way to Remove Labels from Bottles and Jars: Peel gently for a spotless adhesive free!
Opening bottles and jars can sometimes be a challenge. Removing the adhesive residue left on the surface of the item can be particularly difficult. If you’re looking for a simpler way to remove bottle and jar labels, here are some tips you shouldn’t overlook.
