The Ultimate DIY: Craft an Auto-Closing Door with a Simple Water Bottle Hack
Have you ever heard of an automatic door closer made from a plastic bottle? In this introduction, we will guide you through an incredibly simple way to create one.
Don’t throw away empty plastic bottles; upcycle them into a handy tool to auto-close your doors! Follow our simple guide below to create your own door-closing mechanism.
1What You’ll Need
1 x 500ml plastic bottle (filled with water)
1 x length of round paracord (approximately 0.8m – 1m in length)
2 x adhesive wall hooks
2How to Make an Auto-Closing Door Mechanism Using a Plastic Bottle
Step 1: Tie one end of the paracord securely to the neck of the bottle.
Step 2: Form a small, fixed loop with the remaining cord.
Step 3: Attach one adhesive hook to the door frame.
Step 4: Affix the other adhesive hook to the top corner of the door, ensuring it forms a 45-degree angle.
Step 5: Loop the cord over the hook on the door, then thread it through the hook on the door frame.
With these simple steps, you’ve created your very own auto-closing door mechanism! Impress your friends and family with this nifty trick.
As you open the door, the bottle is lifted, and its weight naturally pulls it back down, gently swinging the door shut.
Note: If you have young children at home, use caution with this method to prevent any accidental finger-trapping.
There you have it—a creative way to upcycle plastic bottles into a handy auto-closing door mechanism. Give it a try and see the magic happen!
Frequently asked questions
The article provides a step-by-step guide on how to craft an auto-closing door mechanism using a simple water bottle hack.
The mechanism utilizes the principle of displacement and buoyancy. By attaching a water bottle to the door and filling it with the appropriate amount of water, the bottle acts as a counterweight. When the door is opened, the water in the bottle shifts, creating an imbalance that slowly pulls the door back towards the closed position.
The materials required for this project include a plastic water bottle, a sharp knife or scissors, a door stopper, and water. Additionally, you will need basic tools such as a drill and screws for installation.
The article suggests cutting a small hole in the bottom of the water bottle and threading it onto a door stopper. This allows the bottle to be securely attached to the door while still being able to swing freely.
The amount of water filled in the bottle will depend on the weight and swing of your door. It is recommended to start with a partially filled bottle and adjust the water level until the desired closing speed is achieved.
This auto-closing door mechanism is suitable for lightweight interior doors. For heavier doors or exterior doors, a different approach or additional modifications may be required.
As with any DIY project, it is important to take appropriate safety measures. Ensure that the door is properly secured and that the mechanism is installed correctly to prevent any potential hazards. Supervise children and pets to avoid accidents.
Are you looking for an easy way to make a thermos right in the comfort of your own home? Điện máy XANH has got you covered with five steps to help you create your own homemade thermos! Read on to find out how.
Take advantage of these practical suggestions now! You’ll be amazed at the impressive “sparkling clean” results that can be achieved using these simple rubber tubes.
With just a small plastic bottle placed in the toilet tank, the daunting task of cleaning the bathroom will no longer be on your mind, and the unpleasant odor will quickly disappear.