Tips

The Ultimate Guide to Cleaning Your Immersion Blender: A Step-by-Step Tutorial

If you're obsessed with keeping your handheld blender spotlessly clean, then join us as we explore the ultimate guide to cleaning your blender from A-Z!

Administrator

28 July, 2024

Handheld blenders are a handy tool in any household. With this device, you can grind meat, blend smoothies, and perform many other unique functions. However, with frequent use, your blender may accumulate stubborn dirt and grime, making it challenging to clean. So, today, let’s explore a comprehensive guide on how to clean your handheld blender from A to Z.

1 What You’ll Need

A bowl of warm water
Dish soap
A soft cloth or sponge
Vinegar
A towel

2 Cleaning Your Handheld Blender

Step 1 Disassemble the Parts

Disassemble the parts

First, unplug the blender from the power outlet for safety. Then, detach the blades and blending jars from the motor unit.

Step 2 Rinse the Parts

Rinse the parts

Soak the blade assemblies and jars in a bowl of warm water for 5-10 minutes to loosen any stubborn dirt.

Next, use a dishwashing sponge or a soft cloth dampened with warm water and a small amount of dish soap to scrub each component gently. Rinse them with cold water afterward.

If the blades have stubborn residue, dry the blades and reattach them to the motor unit. Then, turn on the blender and run it in a bowl of water with vinegar and dish soap for about 30 seconds.

Step 3 Clean the Motor Unit and Buttons

Clean the motor unit and buttons

Use a cotton swab dipped in vinegar or soap solution to clean the motor unit and buttons, removing any grime or residue. Follow up by wiping the unit with a soft cloth.

Finally, coil the power cord neatly around the blender and store it in a dry place to prevent mold or mildew.

Note:
Do not put the blender in the dishwasher as it may dull the blades. Also, avoid submerging the motor unit in water to prevent electrical damage.

We hope these tips help you thoroughly clean your handheld blender from A to Z!

Frequently asked questions

To clean your immersion blender, fill a tall glass or container with warm water and a few drops of dish soap. Immerse the blender in the water and turn it on, blending for a few seconds. Next, rinse the blender under running water and dry it with a clean cloth. For tougher stains, use a gentle scrub brush or a toothpick to dislodge any remaining food particles.

Fill a container with warm water and add a few drops of dish soap. Immerse the blender and let it soak for a few minutes. Then, use a gentle scrub brush or an old toothbrush to carefully clean the blades, removing any stuck-on food particles. Rinse the blender under running water and dry it thoroughly.

It is recommended to clean your immersion blender after each use. This will prevent food buildup and ensure that your blender remains in good working condition.

It is not recommended to put your immersion blender in the dishwasher. The intense heat and strong detergents used in dishwashers can damage the blender’s motor and blades. Hand washing with warm, soapy water is the best way to ensure your immersion blender lasts for years to come.

Mild dish soap is the best choice for cleaning your immersion blender. Avoid using harsh chemicals or abrasive cleaners as they can damage the blender’s surface and blades.