Tips to check if your refrigerator is wasting electricity with a piece of paper

Every month, you have to spend a lot of money on electricity bills, but you have no idea where it all comes from. Why not try a simple test with your refrigerator and a piece of paper?

By
Administrator
-
0
185
Many families have been using a refrigerator for several years, even decades. With such a long period of use, many refrigerators will show signs of worn rubber gaskets, causing the door gap to not close properly.

This not only causes the food inside to spoil and mold, but also increases your monthly electricity bill. So how do you check if your refrigerator is using excessive electricity? Let’s try a small trick below.

Check if the refrigerator is using excessive electricity with a piece of paper.

Simple method to check for a faulty refrigerator

The tool you need is a piece of A4 paper.

Step 1: Insert a portion of the paper into the refrigerator and close the door.

Step 2: Pull out the remaining part of the paper from the outside, if it comes out easily, it means that the rubber gasket of the refrigerator is very worn, which will reduce the quality of the refrigerator and increase the electricity consumption.

How to fix it

Because the gasket is made of rubber, to fix the problem of it being worn, you can use a hairdryer to blow directly on the gasket. When it gets hot, the rubber gasket will expand and stick tightly to the door. You can check it again by inserting a piece of paper into the door gap until it can no longer be pulled out.

With this simple checking method, you can determine whether your refrigerator is using excessive electricity or if the quality of food preservation is reduced. Take the time to check it now so that your electricity bill will not increase too much next month.

According to VOV

You may also like

Putting a bill in the refrigerator unexpectedly proves to be so useful, every household should try it at least once.

This tip not only increases the lifespan of the refrigerator but also helps save electricity.

Frequently asked questions

You can perform a simple test using a piece of paper. Here’s how: Firstly, ensure the refrigerator door is closed tightly. Then, place a piece of paper or a dollar bill between the door gasket and the fridge frame. If the paper can be easily pulled out, or falls out on its own, the gasket may need to be replaced or adjusted as it is not sealing properly, causing cold air to escape and wasting energy.

In addition to the paper test, there are other indications that your refrigerator may be inefficient. These include: – Condensation or frost buildup on the outside of the unit, which suggests poor insulation or a faulty seal.
– Strange noises, such as buzzing or clicking, which could indicate a problem with the compressor or fans.
– The motor running constantly, which may be a sign of a failing thermostat or a build-up of dust on the coils.

Maintain your refrigerator by regularly cleaning the coils and ensuring adequate ventilation. Check the door seals and replace them if necessary. Keep the refrigerator at an optimal temperature, usually around 37-40 degrees Fahrenheit for the fridge and 0-5 degrees for the freezer. Also, avoid overloading the fridge, as this can block air vents and hinder proper circulation.

It is recommended to inspect the door gasket or seal at least once a year. Look for any cracks, tears, or signs of deterioration. You can also perform the paper test described earlier to ensure the seal is functioning properly. Replacing a worn-out gasket is a simple and cost-effective way to improve your refrigerator’s efficiency.

Yes, you can use a similar paper test for checking oven door seals. Simply place a piece of paper in the door, close it, and try to pull the paper out. If it pulls out easily, the oven door may need adjustment or a new gasket. Additionally, you can use a power meter to measure the energy consumption of appliances and identify any that are using excessive electricity.

RELATED ARTICLESMORE FROM AUTHOR