Exploring Causes & Solutions for 4 Common Air Compressor Errors

1The machine starts but it doesn’t run

Reason:

If the machine is not running despite starting, the first thing to check is the power connection. Ensure that the power connected to the machine is stable and not interrupted or fluctuating, as this can prevent the machine from functioning properly.

How to fix:

Inspect the power plug to ensure it is securely connected to the power source. If the plug is secure and the machine still doesn’t work, check the main power source for any issues.

2The machine does not spray air or sprays weakly

Reason:

When the air compressor fails to spray air or produces weak sprays, it could be due to the following reasons:

• The amount of medication in the container is incorrect for its capacity.
• The medication spray valve in the cup might be faulty or installed incorrectly.
• The air hose in the machine is damaged or bent, hindering the spray of medication.
• The air filter is contaminated with dirt due to lack of cleaning over a prolonged period.

How to fix:

• Check the container’s capacity and make sure to use the correct amount of medication.
• Refer to the instructions for the container and ensure that the medication spray valve is installed correctly.
• Regularly clean the machine, especially when used for an extended period of time.

3The machine makes louder noise than normal

Reason:

When the air compressor produces louder noise than usual, it could be because the air filter cap is not properly closed or installed correctly. Additionally, a malfunctioning internal fan system can also cause excessive noise.

How to fix:

To address the filter cap issue, carefully follow the instructions for assembling the machine’s parts to avoid incorrect installation. For the internal fan problem, it is recommended to take the machine to a service center for inspection, as the fan is an essential component of the air compressor.

4The machine gets very hot when in operation

Reason:

Air vents are responsible for releasing the hot air generated during machine operation, ensuring efficient performance. When airflow through the vents is obstructed, the machine will gradually heat up.

How to fix:

Ensure that the air vents are clean and not obstructed by any objects. If the vents are clear and the machine still overheats, it is advisable to have it inspected at a service center.

We hope this article has provided you with useful information on the 4 common errors encountered with air compressors. We have outlined the causes and provided solutions. We wish you success in addressing these issues!