Causes and Solutions for a Shaking Washing Machine

When using a high-speed washing machine, it is important to ensure that the machine is operating smoothly to effectively clean and squeeze clothes. However, if the washing machine is shaking excessively and making loud noises, it indicates that there is a malfunction that needs to be addressed. In this article, we will explore the causes of a shaking washing machine and provide solutions to resolve this issue.

1. Causes of Washing Machine Shaking

Uneven Placement of the Washing Machine

When the washing machine is placed on an uneven or rough surface, it can cause the machine to tilt, resulting in the drum hitting the shell and causing loud noises and vibrations.

Solution:

• Check the surface where the machine is placed and ensure it is level. If necessary, use objects to support the machine’s legs to maintain a level position.
• Create a stable support using concrete or a sturdy wooden board to place the washing machine on.

Improper Use of Washing Machine Legs

If the washing machine legs are loose or damaged, it can lead to shaking and imbalance during operation.

Solution:

Tighten the screws on the machine’s legs using a screwdriver if they are loose. Replace any damaged legs with new ones.

Uneven Load Distribution in the Drum or Overloaded Clothes

Putting too much clothes into the machine or not evenly distributing them can lead to imbalance and cause the washing machine to shake.

Solution:

• Sort and separate clothes before putting them into the washing machine to reduce rolling.
• Check the appropriate washing load capacity of the machine.
• Arrange the clothes in the same direction before starting the wash cycle.
• Pause the machine if it shows strong shaking and noise to check the arrangement of clothes inside.

Foreign Objects Left in the Drum

If foreign objects are left in the drum, they can cause damage to the washing machine and affect its performance.

Solution:

• Thoroughly check clothes and the drum before starting a wash cycle to prevent leaving any foreign objects inside.
• If the machine makes strange noises, stop the operation and inspect the drum.

Broken Shock Absorbers

Shock absorbers help reduce shaking and vibrations in the washing machine. If they are damaged, the machine will shake violently.

Solution:

Contact a repair technician or the washing machine warranty center to properly repair and replace the shock absorbers.

Faulty or Old Washing Machine

If the washing machine is too old or has been in operation for a long time, it may experience issues such as loud noise and strong shaking.

Solution:

• Clean the washing machine regularly every 3-6 months to detect any damage and extend its lifespan.
• Consider replacing the washing machine if it is too old (used for more than 8 years), especially if it is an older model that is no longer produced.

Broken Drive Shaft and Bearings

The drive shaft and bearings help the washing machine motor move smoothly. When these parts are broken, the machine will shake and make loud noises.

Solution:

Contact a repair technician to replace the drive shaft and bearings properly and safely.

2. Should You Repair a Shaking Washing Machine?

While it is normal for a washing machine to shake during operation, excessive shaking and loud noises indicate a problem that needs immediate attention. To ensure long-term use and prevent further damage, it is best to have a qualified technician check and repair the machine rather than attempting to fix it yourself.

Take note of the causes and solutions discussed in this article to effectively address any issues with your shaking washing machine.