Quickly Remove 502 Glue from Skin – Here’s How

The solution of liquid 502 adhesive, when applied to the skin, quickly forms a thin white layer that adheres firmly to the skin. When you get stuck with glue, you may have the habit of rubbing the glued finger with your thumb, causing the fingers to stick together and making the problem worse. Stay calm and follow these steps:

Step 1: Soak in warm water and use nail polish remover

Step 1: Dip your hands in warm soapy water and soak for 10 minutes or until the glue softens. Then gently remove the adhesive layer from your fingers.

Step 2: Wash your hands and dry them thoroughly. Check if there is any remaining glue. If there is, apply nail polish remover to the glued skin and gently rub. You will see the white glue slowly disappear.

Step 2: Use margarine to soften the glue

If you have sensitive skin, you can apply butter to the glued area. Apply butter continuously until the glue softens, then rinse with water.

Step 3: Use sandpaper and machine oil to remove the glue

Step 1: Use sandpaper or a nail file to gently rub the white glue on your hand. Avoid rubbing too hard to prevent scratches on the skin.

Step 2: After rubbing with the sandpaper, apply machine oil and gently rub the glued skin. Then rinse thoroughly with water. You can also use gasoline, kerosene, or alcohol instead of machine oil.

Step 4: Use oil

Using oil is also an effective way to remove the glue. Apply some oil directly to the glued area and gently rub it. This will help soften the glue and make it easier to remove.

Use specialized glue remover

If you have a large area of glue on your skin, it is recommended to use a specialized 502 glue remover to quickly remove the glue layer and minimize the impact on your health and the health of your loved ones.

You can purchase a specialized 502 glue remover at building materials stores, glass shops, or electronics stores.