Restore Shine to Rusty Washing Machine Instantly

Do you have a rusty washing machine bothering you? Check out these simple tips to make your washing machine look shiny and new in no time!

0
216

Due to the hot and humid climate in Vietnam, washing machines are prone to rust. This not only shortens the lifespan of the washing machine but also poses a safety risk to the user in terms of cracking and electric shock. So, how can this situation be resolved? Find out in the article below.

The Main Causes of Washing Machine Rust

What causes the washing machine to rust?
What causes the washing machine to rust?

Rust is a common phenomenon where the protective paint on the washing machine body gets scratched, resulting in yellow or red patches, as well as brown stains inside or outside the machine. There are two main causes of washing machine rust:

  1. The body of the washing machine is made of metal, which oxidizes over time and leads to rust.
  2. Improper placement of the washing machine can cause the protective paint to peel off easily, resulting in rust.

How to Fix a Rusty Washing Machine

How to fix a rusty washing machine?
How to fix a rusty washing machine?

Here are some effective methods to fix a rusty washing machine:

Method 1: Take Advantage of Toothpaste

Take advantage of toothpaste
Take advantage of toothpaste

  1. Apply a moderate amount of toothpaste to the rusted area.
  2. Rub the toothpaste on the rusty surfaces.
  3. Scrub until all stains are removed from the washing machine.
  4. Use a damp cloth to wipe clean.
  5. Note: This tip only applies to rust stains on the outside of the machine.

Method 2: Use White Enamel or Special Zinc Primer

Use white enamel or special zinc primer
Use white enamel or special zinc primer

  1. Seal the area around the rust spot.
  2. Use sandpaper to remove rust spots.
  3. Wipe the cleaned area with a degreaser.
  4. Apply primer and spray paint about 30-35 cm away from the machine.
  5. Apply a second coat after 20-30 minutes and wait until completely dry.
  6. Note: Avoid using detergents to remove rust, as it can scratch the body and promote bacterial growth.

Method 3: Use Vinegar or Citric Acid

Use vinegar or citric acid
Use vinegar or citric acid

  1. Apply a small amount of citric acid solution to the rusted area.
  2. Let it sit for 1-2 hours to allow the solution to work.
  3. Thoroughly clean with a towel until completely clean.
  4. Note: This method only helps temporarily remove rust stains in the machine. If important parts in the drum are rusted, they should be replaced.

Method 4: Use a Water Purifier

Use a water filter
Use a water filter

Unsanitary water is also a cause of washing machine corrosion. Using a water purifier can ensure the water is safe and free from harmful substances, thereby increasing the lifespan of your washing machine.

Method 5: Use Chemicals

Using chemicals
Using chemicals

  1. Spray an RP7 rust remover solution on the rusted area of the washing machine.
  2. Use a cloth to remove the stains.

Method 6: Use Baking Soda

Use Baking Soda
Use Baking Soda

  1. Create a mixture of 1-2 tablespoons of baking soda and a little vinegar.
  2. Apply the mixture to the rusted area and scrub it clean.
  3. Rinse with water.

Wish you success in handling a rusty washing machine with the methods mentioned above. Don’t forget to share this helpful tip with your friends and family.