Tips

4 Quick and Easy Ways to Remove Scratches from Your Motorcycle and Make it Look Brand New

"A scratch on your car or bike is an eyesore and can ruin the aesthetic appeal of your vehicle. Stay tuned as we reveal quick and easy ways to remove those unsightly scratches and make your ride look brand new again!"

Administrator

14 July, 2024

Motorcycle scratches are a common issue that can be a real headache, especially for new and expensive bikes. We understand your frustration, so today we’re sharing some quick and easy ways to remove those unsightly scratches.

1 Ways to Remove Scratches from Your Motorcycle

Toothpaste to the Rescue

What You’ll Need:

Toothpaste (any kind will do)
Water
Clean cloth and soft cotton cloth

Instructions:

Step 1 Mix a small amount of dish soap with water and dip the cotton cloth into the solution.

Step 2 Use the dampened cloth to gently rub the scratch, softening it. Then, use a soft cloth to wipe it clean.

Step 3 Apply toothpaste to the scratch and use a dry cloth to rub it in, focusing on one scratch at a time.

Remove scratches with toothpaste

Clear Nail Polish to the Rescue

What You’ll Need:

Clear nail polish
1 dry, clean cloth

Instructions:

Step 1 Use the dry cloth to wipe down the scratched area, ensuring it is clean and dry.

Step 2 Apply the clear nail polish to the scratch, moving slowly and steadily. If the scratch is vertical, apply the polish horizontally, and vice versa.

Remove scratches with clear nail polish

Sandpaper to the Rescue

What You’ll Need:

Coarse and fine sandpaper
1 blowtorch
1 clean, dry cloth
1 can of Goracing spray

Instructions:

Step 1 Use the coarse sandpaper to sand the scratch, moving in one direction and applying even pressure. Then, wipe the area with a dry cloth.

Step 2 Follow up with the fine sandpaper, continuing to sand until the area feels smooth to the touch. Use the cloth to wipe away any dust created during sanding.

Step 3 Use the blowtorch to heat the sanded area, being careful not to hold it too close to avoid melting the paint. Then, spray on the Goracing product and wipe it clean with the cloth.

Remove scratches with sandpaper

Repaint Your Motorcycle at Home

What You’ll Need:

Coarse and fine sandpaper
Scratch remover putty
1 can of 1K zinc primer
Kuruma clear coat
Water

Instructions:

Step 1 Use the coarse sandpaper to sand the scratch, dipping it in water as you work. Follow up with the fine sandpaper, then rinse and dry the area.

Step 2 If there are any stickers or decals on your bike, use tape to cover them to avoid getting paint on them. Apply the putty to the scratch, using 2-3 layers for deeper scratches.

Step 3 Once the putty is dry, use the coarse and fine sandpaper again to smooth out the area. Be gentle this time to avoid removing too much putty. Then, apply the primer and, once dry, the Kuruma clear coat for a shiny finish. Remove the tape from the stickers.

Repaint your motorcycle at home

Note: For deeper scratches that are beyond your skill level, it’s best to take your bike to a professional repair shop.

2 Tips to Prevent Scratches

Tips to prevent scratches

Use a Protective Film: Apply a clear, thick plastic film to your motorcycle to act as a barrier against scratches. This method is also known as using anti-scratch tape.

Wrap Your Motorcycle: Another option is to use a wrap, which is a layer of anti-scratch decal applied to the outside of your motorcycle. With this method, you can also change the color of your bike to suit your style.

Nano-Coating: This involves spraying a thin layer of polymer onto your bike, which protects it from scratches and prolongs its lifespan.

We hope these tips and tricks help you keep your motorcycle looking its best. If you have any questions or concerns, don’t hesitate to reach out to a professional for further advice.

Frequently asked questions

There are several quick and easy ways to remove scratches from your motorcycle’s paintwork. You can use a paint restoration product, such as a scratch removal cream or a rubbing compound, to buff out the scratches. For deeper scratches, you may need to use a wet sanding process before buffing. After removing the scratches, you can restore the shine to your motorcycle’s paintwork by using a polishing compound and a soft cloth.

To remove scratches from a motorcycle windshield, you can use a plastic polish or a glass repair kit. Apply the polish or compound to a soft cloth and work it into the scratch in a circular motion. For deeper scratches, you may need to use a wet sanding process before polishing. Finally, use a clean, soft cloth to buff the area to a shine.

To make your motorcycle look brand new again, start by giving it a thorough cleaning and detailing. This includes washing and waxing the paintwork, polishing the chrome, and cleaning the wheels and tires. You should also pay attention to the smaller details, such as the mirrors, lights, and controls. In addition to this, consider using paint restoration products to remove any scratches or swirls in the paintwork, and use a polishing compound to restore the shine. Finally, you can add a layer of protection and shine by applying a high-quality motorcycle wax or sealant.

Yes, there are a few home remedies that you can try to remove scratches from your motorcycle. One method is to use a mixture of baking soda and water to form a paste. Apply this paste to a soft cloth and work it into the scratch in a circular motion. Another option is to use toothpaste, which can help to fill and buff out minor scratches. Simply apply a small amount of toothpaste to a soft cloth and work it into the scratch until it disappears.