This article provides a guide on how to navigate the channels on the Samsung J4100 TV model, using both digital and analog methods.
Step 1: Press the menu button on the remote control.
Step 2: In the menu interface, select the broadcasting section.
Step 3: In the broadcasting menu, choose the option for automatic channel search, and then click on start.
Step 4: The TV screen will switch to the automatic channel search interface. You can choose between regular TV channels (analog) or digital TV channels DVB-T2 (digital). You can select both analog and digital signals for detection.
Step 5: Once you have finished selecting, click on Scan to start scanning the channels. After a successful channel scan, click on close to exit the channel search interface.
After completing the channel scan, you can enjoy the TV channels that have been received.
Please take note that the number of TV channels received may vary depending on your geographical location and the condition of your antenna for signal reception at home. If you have any questions about searching for DTV channels on the Samsung J4100 TV model, please leave your comments below!