This article will provide you with ways to use energy-saving air conditioners to achieve high cooling efficiency while keeping your electricity bill very low.
1. Choose the “dry” mode:
Use the controller to switch the cooling mode from “Cool” (represented by a snowflake symbol) to “Dry” (represented by a water drop symbol) is a way to use air conditioning that saves electricity and is little known. This simple operation will reduce the power consumption of the air conditioner by 10 times, limit heat shock because the room temperature will not be too low at 23 degrees Celsius and will not fluctuate greatly with the outside temperature.
In reality, this method saves electricity because when operating in Cool mode, the air conditioner takes heat from the room to push it out to the outside, helping to lower the temperature and cool the air in the room. The energy consumption for this operation of the air conditioner is considerable. Meanwhile, in Dry mode, the air conditioner will extract moisture from the room, returning fresh and dry air. This mode consumes less energy than cooling mode. Reducing energy consumption also means less electricity consumption, resulting in less electricity cost. So, you can save more money for your family.
However, it should be noted that not all air conditioners have the “dry” function, but if your air conditioner has this mode, choose the water drop symbol instead of the snowflake symbol. One of the most widely used air conditioner brands today is Panasonic, and with this “Dry” mode, this is how to use Panasonic air conditioner to save electricity that users can refer to.
2. Avoid constant on-off and remember to turn off the circuit breaker
Many people often do not believe that there is a way to turn on the air conditioner to save electricity, but in reality, a small note in turning the air conditioner on and off also has a huge impact. If you have a habit of setting a low temperature, waiting for the room to cool down, then turn off the air conditioner and turn on the fan, and turn on the machine again when it feels hot, then you should stop. Because in reality, this is a mistake that consumes more electricity and can quickly damage the machine.
When starting up, the air conditioner consumes a lot of energy to start the compressor, fan motor and cool the air to the required temperature. Because at that time, the temperature in the room has increased a few degrees, to the point where the body can feel it. The constant on-off operation also reduces the durability of the air conditioner. According to advice, always turn on and off the air conditioner before going out for about 30 minutes. After using the remote control to turn off the machine, always turn off the circuit breaker (the power switch to the machine) because in reality, when turned off by the remote control, the machine still consumes standby power.
3. Set a timer to turn off the machine
The timer button on the remote control is very useful and is one of the simple ways to use air conditioning to save electricity that we often forget. Use the timer mode of the air conditioner to choose the time to turn off, especially at night. The timer ensures that you have a good night’s sleep, not cold at night, and can save electricity very effectively.
4. Don’t run the air conditioner 24/24
The most energy-saving way to use an inverter air conditioner or any air conditioner is that you should not run the air conditioner 24/24 even on the hottest days. In fact, running the air conditioner continuously all day will be harmful to your health because the air is not circulated and the humidity in the room is significantly reduced.
Therefore, turn off the air conditioner and use a fan during times when it is not too hot during the day. This will make the room more airy and save a significant amount of energy. If combined with a fan and placing a cool water basin, it will help improve the efficiency of use because the fan helps circulate cool air in the room.
5. Adjust the temperature reasonably
Many people think that keeping the air conditioner at the same temperature will save electricity. This is completely wrong. According to the recommendations of the US Energy Agency, the most energy-saving way to use air conditioning is to increase the temperature when you are not in the room. The air conditioning system works efficiently at high temperatures for a long time.
Always set the air conditioner at the highest temperature to save the most electricity. Even a small change in temperature will increase costs. The US Energy Agency recommends that the best indoor temperature is 25 degrees Celsius. In addition, you can use other methods such as turning off electrical appliances in the house to avoid increasing the temperature.
6. Prevent heat from escaping through gaps
One of the ways to use air conditioning to save electricity is to limit heat loss. When turning on the air conditioner, if your house room has gaps, it will not cool quickly and cold air will easily escape. If the air conditioner is still new, it can cool quickly, but older models that have been used for a long time, if cold air leaks out of the gaps, it will cause the air conditioner to operate at high power all the time.
You can check it yourself by going outside and placing your hand on the window, the gaps of the door. If your hand feels cool, it is certain that the air inside the house is leaking out. Therefore, you can seal the gaps with tape or ask the technician to check and handle it.
Curtains also have a great effect in reducing the temperature of the room. There are currently types of curtains that block sunlight. Curtains help prevent direct sunlight from entering the room, increasing the temperature, while also isolating the window to prevent indoor air from escaping.
According to thoidaiplus.giadinh.net.vn
Easy and Effective Strategies for Eliminating Mosquitoes in an Air-Conditioned Room
Are you annoyed by pesky mosquitoes despite being in a cool air-conditioned room? If so, this article will provide you with plenty of simple strategies you can use to help you avoid these biting bugs.
How to Choose the Best Air Conditioning Setting for a Humid and Damp Home
As the cooler temperatures of winter and spring begin to set in across the Northeast, families are confronted with an additional worry – how can they protect their homes from mold and dampness? While a dehumidifier is an effective measure, are there other air conditioning or cooling methods which can be used to ensure the air remains free of moisture and fungi?
How to Choose the Right Air Conditioner Mode for Lower Energy Bills
Do you know about the different modes on your air conditioner that not only cool quickly but also help save energy? If not, you should know that these modes exist and are incredibly helpful!
6 golden rules for saving up to 1/2 of your electricity bill with your refrigerator
Remember these 6 “untranslatable” rules when using a refrigerator to save up to 1/2 of your electricity bill. Housewives should keep them at the back of their minds.
Tips for using air conditioning to save electricity during hot summer days.
On scorching hot days, not everyone knows how to use an air conditioner properly to keep a room cool and save electricity.
