Is Your Washing Machine a Ticking Time Bomb? The Dangers of Improper Use and Placement.

Washing machines are hailed as one of the greatest inventions in human history. Their advent has liberated people, especially women, from the laborious and time-consuming task of hand-washing clothes.

Despite their prevalence in households and daily use, many people still misuse washing machines, turning this helpful appliance into a potential hazard. One of the reasons for this dangerous situation is the incorrect placement of the machine.

Where Not to Place Your Washing Machine

1. In the Bathroom

It is common for families to place their washing machine directly in the bathroom. However, this practice is highly dangerous. Bathrooms are often humid and have water sources, which, if leaked, can lead to electrical hazards and disastrous consequences.

2. On the Balcony

Some people believe that placing the washing machine on the balcony will prevent dampness due to its openness. Unfortunately, this is a misconception! The constant exposure to sunlight will accelerate the deterioration and peeling of the machine. If you must place it on the balcony, use a cover or a shield to block direct sunlight and dust accumulation. Of course, wherever you place your washing machine, ensure it is well-ventilated, and always use a safe power outlet to reduce the risk of short circuits and potential explosions.

As washing machines are used frequently and have a large capacity, you may wonder how to use them more efficiently and economically.

Here are some tips for energy-efficient washing machine use:

1. Sort Your Laundry and Choose Low-Foam Detergent

Before loading your washing machine, sort your laundry by color, fabric type, thickness, or function. The energy consumption of a washing machine depends on its usage, and the duration of the wash cycle should be determined by the type and dirtiness of the clothes. It is best to use detergents with low alkalinity, mild cleaning power, and low foam formation. These detergents are easier to rinse off, reducing the number of rinses and saving water and electricity. Additionally, they help maintain the color and longevity of your clothes.

2. Choose the Right Wash Cycle

One of the tricks to saving energy is to select the appropriate wash cycle. For smaller loads, opt for a gentle cycle with a moderate water level. For larger loads, choose a longer cycle. When washing items like blankets, duvets, or pillows, use a cycle with a longer duration and a higher water level.

3. Reduce Spin-Drying Time and Soak Clothes Before Washing

The spin-drying process can consume a lot of energy, as the drum rotates at speeds of up to 1600 rpm to remove water from the clothes. To save energy, consider reducing the spin-drying time. Additionally, soaking clothes in detergent or soap solution for 15-20 minutes before washing can help loosen dirt and grease, reducing the need for lengthy wash cycles.

4. Determine the Optimal Water Level

Using too much water increases the pressure on the wave-making plate, overloading the motor and consuming more electricity. Conversely, too little water will hinder the agitation process, lengthening the wash cycle and increasing energy consumption. Therefore, it is crucial to adjust the water level according to the load size.

Keeping the load weight within the machine’s rated capacity will also contribute to energy efficiency.

Over time, your washing machine may encounter problems. If you are unfamiliar with its inner workings, it is best to call a professional technician rather than attempting repairs yourself, as this could lead to further complications.

By An Nhien – Vietnamnet