Impact of Faulty LG Washing Machines
– Clothes are not effectively cleaned due to incorrect washing cycles or insufficient water supply.
– Soap residue remains on clothes after washing, causing them to foam when hung out to dry.
– The washing machine stops mid-cycle, requiring a restart, which leads to fabric damage and accelerated wear and tear.
Illustrative image
Error Codes for LG Front-Loading Washing Machines
1. LG Washing Machine Error Code OE: Unable to Drain Water Completely
Error Information: The OE error code indicates that the front-loading washing machine is unable to drain water completely during the wash cycle.
Cause: The drain hose is bent or the drain pump filter is clogged.
Solution:
– Inspect the drain hose for bends or blockages and clear any obstructions.
– Check the drain pump: Run a spin-only cycle to test the drain pump.
Press Power to turn on the machine >> select Speed >> choose High Speed >> press the Start/Pause button to begin.
If you hear a buzzing or rattling noise, the pump is functioning properly. If not, the drain pump may be faulty and needs repair or replacement.
2. LG Washing Machine Error Code IE: Insufficient Water Supply
Error Information: The LG washing machine is unable to draw enough water to perform the selected wash cycle.
Cause:
– The water inlet is blocked or the water supply valve is not fully open.
– Weak water flow, insufficient for the completion of the wash cycle.
– Clogged or blocked water inlet hose.
Solution:
– Ensure the water inlet valve is fully open by turning it to its maximum capacity to ensure sufficient water pressure for the machine.
– Inspect the water supply hose for bends or blockages and clear any obstructions.
– Check the water inlet filter for clogs and clean it if necessary.
3. LG Washing Machine Error Code UE (uE): Unbalanced Load
Error Information: During the wash cycle, the spin sensor detects an unbalanced load and displays the error code, usually during the rinse and spin phases.
Cause: Laundry items may be tangled together and unevenly distributed in the drum, or the washing machine may not be placed on a level surface.
Solution:
– Pause the machine, redistribute the laundry items, then close the door securely and resume the wash cycle.
– Check if the washing machine’s feet are level; adjust the feet of the inclined legs to ensure the machine is stable and level.
4. LG Washing Machine Error Code CL: Child Lock is Activated
Information: When the display shows error code CL, it is not a malfunction. It is an indication that the child lock feature is activated, disabling the control panel buttons.
Solution: Press and hold the Child Lock/Unlock button for 3 seconds. The “CL” notification will disappear, and all buttons will function normally.
5. LG Washing Machine Error Code LE: Overload
Error Information: After loading laundry into the machine, it will spin to determine the load and wash time. The display will show error code LE.
Cause:
– Overloading the washing machine with too much laundry, exceeding the permitted load capacity.
– A faulty load sensor.
Solution:
– Turn off the power, open the door, remove some laundry items, then close the door securely. Restart the wash cycle.
– If the error persists, the load sensor may be faulty and requires repair or replacement.
6. LG Washing Machine Error Code tCL: Drum Cleaning Required
Error Information: After prolonged use, the drum requires cleaning, and the machine will display tCL on the screen.
Cause: Typically, after a certain number of washes, the machine’s automatic system will indicate that drum cleaning is necessary for continued use.
Solution: Remove all laundry from the machine, pour detergent or laundry cleaner into the detergent compartment, then select the drum cleaning cycle. After the cycle is complete, the machine will resume normal operation.
7. LG Washing Machine Error Code DE: Door Not Locked
Error Information: The washing machine cannot initiate the wash cycle if the door is not locked.
Cause: The door is not closed securely, and the locking mechanism is not engaged, resulting in error code DE.
Solution: Check for any obstructions preventing the door from closing properly. Remove any obstacles, then close the door firmly until you hear a distinct latching sound, indicating the door is locked.
8. LG Washing Machine Error Code CE: Power Source Error
Error Information: The machine pauses due to a power source error, displaying CE.
Cause: This could be due to a short circuit or unstable power supply.
Solution: Contact the warranty service center or a qualified technician to inspect the power supply and control board. Do not attempt to fix this issue without professional assistance to avoid further damage.
9. LG Washing Machine Error Code SUD: Excessive Suds
Error Information: The presence of excessive suds during the wash cycle causes the machine to extend the rinse and spin cycle by approximately 2 hours. If excessive dirt is detected during the spin cycle, the machine will also stop.
Cause: Using an excessive amount of detergent or washing heavily soiled clothes without pre-rinsing can lead to this error.
Solution: Follow the recommended detergent quantity specified on the detergent packaging. Pre-rinse heavily soiled or muddy clothes before placing them in the washing machine.
10. LG Washing Machine Error Code CD: Drying Cycle Completed
Information: This is not an error for LG front-loading washing machines. The CD display usually appears on machines with a drying function. When the drying cycle is complete, the machine will display CD.
Cause: After the drying cycle, the machine automatically switches to a cooling mode.
Action: Remove the laundry after the drying cycle. The automatic cooling function will end on its own.
11. LG Washing Machine Error Code DE 1, DE 2: Door Not Closed
Information: The washing machine will not operate if the door is not closed.
Solution: Close the door securely until you hear a distinct latching sound, and the display shows a key symbol.
12. LG Washing Machine Error Code FE: Overflow or Water Leakage
Information: The machine detects that the water level is exceeding the permissible limit.
Cause: A faulty water level sensor may be unable to cut off the water supply, or the water inlet hose may be leaking.
Solution: Turn off the water supply. Press the rinse and spin button on the machine until the cycle is complete. Inspect the water inlet hose for leaks, then restart the machine and perform a wash cycle. If the machine still displays error code FE, discontinue use and contact the warranty service center or a qualified technician.
13. LG Washing Machine Error Code PE: Float Switch Error
Cause: The pressure switch or float in the machine is faulty or malfunctioning.
Action: As this error pertains to the hardware, it is advisable to contact the manufacturer for guidance and support.
14. LG Washing Machine Error Code PF: Interrupted Power Supply
Error Information: Unstable or fluctuating power supply, causing the machine to display error code PF.
Solution: Check the power supply, turn off the machine, and restart the wash cycle.
15. Error Code TE: Drying System Malfunction
Information: The drying function is not operating correctly.
Cause: Technical issues within the drying system.
Solution: Contact the warranty service center or a qualified technician for assistance.
Error Codes for LG Top-Loading Washing Machines
1. Error Code DL: Unable to Open the Door
Cause:
– The door cannot be opened due to a flip cover, safety latch, or hinge that is not properly closed.
– The child lock or door lock is engaged.
– A problem with the control board.
Solution:
– Check for any obstructions preventing the door from opening.
If the child lock or door lock is activated, turn off the machine or stop the wash cycle to open the door.
– For issues with the control board or door hinge, repair or replacement may be necessary. Contact a technician for inspection.
2. Error Code AE: Unstable Power Supply
Cause:
– The power supply is unstable and cannot provide a consistent voltage for the washing machine to operate optimally.
– A faulty voltage sensor may be providing incorrect readings.
Solution:
– Check the power supply for voltage fluctuations, including overvoltage and undervoltage.
– Contact a technician or the warranty service center for assistance.
3. Error Code E6: Clutch Error
Error Information: This error occurs when the washing machine detects a foreign object trapped between the wash drum and the tub.
Cause: During washing, a button or clothing fastener may become detached and get stuck between the drum and the tub.
Solution:
– Turn off the machine and disconnect the power supply. Inspect the area between the drum and the tub for any trapped objects, such as coins, buttons, or other small items, and remove them.
4. Error Code CE: Drum Rotation Failure
Error Information: The machine will stop operating if the drum rotation speed does not reach 20 RPM (revolutions per minute).
Cause: Technical fault.
Solution: Unplug the machine and contact the warranty service or a qualified technician for repair.
Additionally, the error codes for LG top-loading washing machines are similar to those of front-loading machines, with identical error information and solutions.
