Taking a shower is a way to relax, but sometimes you encounter unpleasant situations when you think you are at your most relaxed. For example, sometimes when you are showering, the water coming out of the showerhead is mixed with impurities or the water flow from the showerhead is weak, dripping little by little.
The showerhead in the bathroom is clogged, and many people choose to use a needle to unclog it. This method treats the symptoms but does not treat the root cause. It is best to follow the method below, and the water will be clean and flow evenly right away.
Causes that make the showerhead always clogged
1. Poor quality water
Various regions where we live have different water qualities. Many people live in places where the water quality is relatively poor, with many impurities in the daily water that can clog the showerhead. You may even see some white impurities in the water when you shower.
2. Showerhead without filtering function
The types of showerheads that many people buy do not have a filtering function, especially the cheap ones. After using for a while, clogging will occur. After the showerhead is clogged, the inside of the showerhead will be covered in deposits. If the showerhead you are using does not have a filtering function, the water sprayed from the showerhead and the water spots and deposits will quickly form inside the showerhead.
3. Long-term use
Many people use showerheads for a long time without replacing them. The internal parts of the showerhead have issues and are prone to clogging during use.
How to unclog the showerhead?
1. Soak in white vinegar
When the showerhead is clogged, you can use the method of soaking it in white vinegar to clean the deposits. Find a suitable-sized container and pour in enough white vinegar to touch the showerhead. After pouring in the white vinegar, soak the showerhead for over half an hour. Turn on the showerhead after soaking, and the clogging inside will be flushed out. The soaking time should be evaluated based on the degree of clogging of the showerhead and should not be less than half an hour.
2. Use citric acid
The accumulation of lime deposits is also a reason why the showerhead in the bathroom gets clogged. When cleaning the showerhead, we can also use a similar method to clean the deposits, just like cleaning a kettle with citric acid.
The main ingredient in citric acid descaling agents is extracted from lemons. It will not damage the material of the showerhead, and at the same time, it can quickly break down the lime deposits. After the deposits are decomposed, you can clearly see that the showerhead becomes smoother when you turn on the shower.
Citric acid descaling agents can also be used to clean lime deposits on glass, faucets, and other places. After applying this method, the lime deposits will disappear, and the showerhead will be clean and shiny.
3. Replace the showerhead
Another reason why the showerhead in our homes is often clogged is that the showerheads we buy do not have a filtering function. When using, impurities in the water accumulate and form deposits over time. If you don’t want the showerhead to be frequently clogged, you should switch to a showerhead with a filtering function.
If you choose a showerhead, you can try a high-pressure showerhead with a filtering function. It can filter out impurities in the water, and the high-pressure showerhead stabilizes the water flow. After switching to this type of high-pressure showerhead, the water flow rate will be stable, and the super-fine water outlet will make the water flow stronger.
According to An Nhiên – Vietnamnet
4 Tips for Increasing the Water Pressure in Your Showerhead
Are you frustrated by weak water pressure coming from your shower? If so, you’re not alone – many homeowners struggle to get adequate water pressure when they’re washing up. Fortunately, there are simple solutions available to help increase the water pressure of your shower – here are 4 easy steps that could help improve shower performance!