What Should You Do With a New Frying Pan? Tips to Prolong the Lifespan of Non-Stick Coating.

Introducing the ultimate guide to caring for your new pan: "New Pan, New Rules: Unlocking the Secrets to Long-Lasting Non-Stick Success." The key to unlocking the full potential of your new pan lies in understanding the do's and don'ts of its care. With the right knowledge, you can ensure the longevity of its non-stick capabilities and elevate your cooking experiences to new heights. Let's embark on a journey to discover the tips and tricks that will revolutionize the way you use your pan, ensuring it becomes a trusted companion in your culinary adventures.

0
52

If you’re using a pan for the first time, avoid washing it with soap and cooking in it right away. Instead, follow these steps to protect the non-stick coating and prolong the pan’s lifespan, keeping it looking brand new. This method can be applied to cast iron pans, non-stick pans, and other types of pans.

1. What to do with a new non-stick pan?

Step 1 Start by pouring clean water into the pan (the amount of water should be approximately ⅔ of the pan’s capacity).

Step 2 Place the pan on the stove and turn the heat up high. Once you see a lot of steam rising (you don’t need to wait for the water to boil), turn off the heat and pour out the water.

Step 3 Wait for the pan to cool down, then use a piece of cloth or kitchen towel to wipe away any remaining water from the pan.

Step 4 Place the pan back on the stove and turn the heat to the lowest setting.

Step 5 Add a small amount of oil to the pan and use a paper towel to wipe the inside of the pan for 30 seconds, then turn off the heat and let the pan cool down. Repeat steps 4 and 5 two more times to finish the process.

2. What to do with a new aluminum pan?

Step 1 After purchasing the pan, heat it on the stove for about 2-3 minutes.

Step 2 Next, add a small amount of coconut oil or peanut oil to the pan. Once the oil is hot, turn off the heat.

Step 3 Wait for the oil to cool down, then pour it out and wipe the pan clean. This method will help extend the lifespan of your pan.

What to do with a new aluminum pan?

3. What to do with a new stone pan?

Step 1 When you get a new stone pan, place some green tea leaves in a small bag and rub them against the pan’s surface. Then, rinse the pan to get rid of the smell.

Step 2 After that, spread 1-2 tablespoons of coffee powder evenly over the pan’s surface and place it on the stove to heat it up.

Step 3 Once the pan has cooled down, discard the coffee powder and rinse the pan.

What to do with a new stone pan?

4. Tips for prolonging the lifespan of your pan

Add oil before heating the pan: If you heat the pan first, adding oil afterward will cause a sudden change in temperature, which can damage the non-stick coating.

Use wooden spoons and spatulas: Metal utensils can scratch the surface of the pan.

Clean the pan properly: After cooking, add a small amount of cold water to cool down the pan, and avoid using metal scouring pads. Instead, use a soft cloth to wipe the pan clean.

Use moderate heat: Using high heat can cause the pan’s surface to become uneven and the non-stick coating to peel off.

It’s that simple! Just follow these 5 steps to protect your pan and prevent the non-stick coating from peeling off. Don’t forget to clean and store your pan properly to further extend its lifespan.

Frequently asked questions

To prolong the lifespan of the non-stick coating on a new frying pan, it is recommended to season it before first use. This process involves coating the pan with a thin layer of oil and heating it in the oven at a low temperature for an hour. This helps to create a non-stick surface and can improve the pan’s performance and longevity.

It is recommended to season your non-stick frying pan at least once a month, or more frequently if you use it often. Seasoning helps to maintain the non-stick properties of the pan and can improve its overall performance.

You can use a variety of oils to season your frying pan, including vegetable oil, canola oil, or peanut oil. It is important to choose an oil with a high smoke point, as this will help to create a more durable non-stick surface.

It is not recommended to use cooking spray to season your frying pan. Cooking sprays often contain additives and propellants that can leave a residue on the pan’s surface. Instead, opt for a pure oil in liquid form for best results.

To clean your non-stick frying pan, it is best to avoid using abrasive sponges or scrubbers, as these can damage the coating. Instead, use a soft cloth or sponge and mild dish soap. Be sure to thoroughly dry the pan after washing to prevent water spots and rusting. For stubborn residue, you can create a paste from baking soda and water, apply it to the pan, and let it sit for a few minutes before wiping it away.
You may also like

No Scrubbing Required! Clean Your Air Fryer with Self-Draining Grease

Are you wondering how to keep your air fryer clean and working well? Look no further! Here are some simple and effective tips on how to keep your air fryer in top condition.

Don’t Miss This Step Before Cooking – Buy Nonstick Pan

Using the pan improperly can result in a decrease in its lifespan and cause the non-stick coating to peel off. The following tips will help increase the durability of the non-stick pan.