How to Easily Clean a Washing Machine at Home

Why should you clean your washing machine periodically?

The drum of a washing machine is exposed to dirty clothes, bacteria, and fabric dust. Over time, these impurities accumulate inside the washing tub, clogging the filter and draining system, which can lead to damage. If the drum is not cleaned regularly, these residues can transfer to clothes during the wash, resulting in unclean clothes and a musty smell. Cleaning the washing machine regularly extends its lifespan, removes bacteria and residue, helps clothes come out cleaner, improves machine performance, and protects it from deterioration and damage. It is recommended to clean the washing machine every week to prevent dust accumulation and keep it clean and new. A thorough cleaning of the entire machine, including the outer and inner tubs, should be done every 2-3 months, depending on the frequency of use.

In addition, a cleaning service for washing machines is available from Tam Tam company. They provide washing machine cleaning services with clear prices and exceptional service quality. For more information, visit their website at www.dichvutantam.com, or contact their dedicated hotline at 1800.1783.

Instructions for cleaning top-loading washing machines (top-loading washing machines)

– Preparing instruments

Before cleaning a top-loading washing machine, gather the following necessary items: detergent (soap, dishwashing liquid, etc.), toothbrush or sponge, brush, mop, tassel screw, and pressure pump (if needed).

– Steps to clean top-loading washing machine

Step 1: Check the washing machine

Prior to cleaning, check the following issues:

• Is the washing machine working stably?
• Is there any damage to the washing machine?
• Is the spin function functioning properly?
• Does the machine make any unusual noises?

If any damage or malfunction is found, contact the service center or a machine repair team before cleaning the machine.

Step 2: Remove the control panel

Use a 4-prong screwdriver to remove the screws that secure the top of the washing machine. Then, sequentially remove the top cover, including the water supply position. Be cautious when removing the washing machine control panel to avoid damaging the power cord. Remove the fixing screw between the top face and the body, and then remove the top cover of the washing machine.

Step 3: Remove the washing tray and washing tub

Unscrew the screws that secure the washing tub with a screwdriver. Remove the round plastic piece on the washing tub. Unscrew the screw fixing the washing tub to the washing tray. Carefully lift the tub out of the washing machine. Clean the washing tub and remove the filter mesh to clean the dirt inside.

Step 4: Clean the drum

Spray the washing tub inside and out, along with the machine’s accessories, plastic cover on the top using a pressure pump or a faucet. Remove the filter mesh to clean the dirt inside. Clean the outer drum using a brush and detergent solution to remove stubborn stains and small components. Assemble the components and wipe them clean with a cloth.

Step 5: Assemble components and wipe clean

Assemble the drum, top plastic cover, control panel, and components to the body, tightening the fixing screws. Use a clean cloth to dry them.

Step 6: Finish and check the machine again

After cleaning and reassembling, start the machine to check if it is working properly before using it.

Instructions for cleaning front-loading washing machines (horizontal drum washing machines)

– Preparing instruments

Prior to cleaning a front-loading washing machine, gather the following necessary items: water, neutral detergent (all-purpose cleaner), toothbrush, broom, and rags.

– Steps to clean front-loading washing machine

Step 1: Check the washing machine

Before proceeding to clean the front-loading washing machine, ensure it is working properly by checking for any abnormalities or damage.

Step 2: Remove the top and back cover

Use a 4-prong screwdriver to unscrew the back screw and remove the back cover of the washing machine. Then, unscrew the top screw to remove the top cover.

Step 3: Remove the cement block, water supply box, and control panel

Remove the cement block weighing the washing tub. Unscrew the screws and remove the soap dispenser and water supply box. Unplug the jacks and remove the control circuit carefully to avoid damaging the mount.

Step 4: Remove the washing machine door, belt, fork, and motor

Use the lock to remove the front of the machine at the door of the washing tub. Unplug all motor jacks and remove the fork fixing the washing tub. Remove the belt and motor screws from the drum.

Step 5: Separate the washing tub

Use the lock to open the connecting screws and separate the washing tub.

Step 6: Clean and reinstall the washing machine after cleaning

Use a high-pressure spray nozzle to remove dirt and mold. Use mild detergents to remove remaining stains. Dry the washing tub and drum cover with a clean towel. Reassemble the washing machine and check if it is working properly.

Refer to home washing machine cleaning service

Tam Tam company offers a professional cleaning service for washing machines. To avail their washing machine cleaning services or for further information, you can contact their dedicated hotline at 1800.1783. Tam Tam company also provides delivery and installation services for electrical appliances in businesses (B2B), as well as repair and maintenance services for electrical appliances (B2B). For more details, visit their website at www.dichvutantam.com.

►

If you have any questions about cleaning your washing machine, you can contact 1800.1061 or leave a comment below the article. Keep your washing machine clean and in excellent condition!