The Ultimate Guide to Motorcycle Maintenance: 2 Easy Ways to Prop Up Your Bike Without Breaking a Sweat

Are you tired of struggling with your motorcycle's cumbersome side stand? Fear not, as we've got an effortless solution for you! Today, we'll reveal a simple trick to use your motorcycle's side stand without breaking a sweat.

0
65

Most people opt for a side stand as it’s quicker and easier than a center stand. However, if you’re tight on parking space, a center stand can be a great way to save room.

Additionally, when riding long distances or in hot weather, the rubber of your tires can soften. Using a side stand on softened tires can damage the surface and cause the bike to feel bouncy.

So, Bach Hoa XANH will guide you through the traditional way of using a center stand with ease.

1How to Use a Traditional Center Stand

Step 1: Position your bike with the front straight and avoid tilting. Then, firmly grip the front handlebar with one hand and the rear grab rail or tail with the other.

Step 2: Place your left foot as a pivot, and lower the right-side stand until it touches the ground.

Note: Don’t apply force yet, and ensure both edges of the stand touch the ground evenly. If only one edge touches, you won’t be able to lift the stand.

Step 3: Now, forget about your left foot and use your right foot to push down, lifting the entire bike onto the stand. The weight applied to your right foot creates a significant lever force, making it easy to lift the stand.

Remember, both edges of the stand must be in full contact with the ground for the lever force to work effectively.

This traditional method is suitable for larger and heavier bikes like the Lead or SH series.

When lowering the stand, use your foot to block it and prevent the bike from rolling forward. Then, push the bike forward to automatically lower the stand.

2How to Use a Side Stand with a Tilt

Step 1: Lower the side stand of your bike.

Step 2: Using the side stand as support, tilt the bike toward yourself.

Step 3: Now, push the center stand forward with your foot, then tilt the bike back to its original position. And that’s it! You’ve successfully used a center stand.

This method of using a center stand with a tilt is suitable for smaller and lighter bikes as the bike’s weight won’t affect your ability to tilt it.

We hope these tips on using a center stand will make your riding experience easier and more convenient. Good luck and safe riding!

You may also like:

You may also like

Vietnamese drivers create accessories to help park “centimeters perfect” inside houses

Taking advantage of the car’s mirror and the indoor plumbing pipe, a driver has installed a device to assist with parking in tight spaces, minimizing the risk of scratches and collisions.