Tips

The Ultimate Guide to Washing Your Motorbike at Home: A Step-by-Step to a Sparkling Clean Ride

Staying home doesn't mean you have to compromise on a clean car. With the right tools and knowledge, you can achieve a professional-level car wash from the comfort of your own garage. In this guide, we'll teach you the tricks of the trade, so you can keep your car looking showroom-ready without ever having to visit a car wash again.

Administrator

17 July, 2024

If you’re too busy or prefer not to take your motorbike out for a professional wash, here’s a simple guide on how to wash your motorbike at home.

1. What You’ll Need

A household car washer (or a regular hose sprayer)
Grease and grime remover, as well as a lubricant for the bike
Motorbike-specific wash solution
One bucket for water and another for the wash solution
Two sponges, one soft and one hard
Microfiber cloths
Old towels

Gather Your Supplies

2. Washing Your Motorbike at Home

Step 1 Before you start, place your motorbike on a flat surface to prevent it from falling over during the wash. Also, inflate your tires as water can get into the rims and cause rusting, reducing the life of your wheels.

Step 2 Use black tape to cover the keyhole to prevent water from getting inside.

Step 3 Use the hose to spray the entire motorbike to remove loose dirt and grime.

Step 4 Prepare the motorbike wash solution according to the product instructions. Spray the solution all over the motorbike, paying extra attention to the engine, as this area tends to accumulate the most dirt.

Washing Your Motorbike at Home

Step 5 Use the soft sponge to wipe down the entire motorbike, rinsing the sponge frequently to avoid spreading dirt around.

Step 6 Pay extra attention to the following areas: front and rear mudguards, footrests, inner front mudguard, tires, and metal parts. For hard-to-reach areas, use a soft-bristled brush.

Step 7 Rinse the motorbike thoroughly with clean water to remove any remaining detergent. Use microfiber cloths to dry the motorbike, making sure to absorb any water from areas like the keyhole and spark plug.

Step 8 Finally, start the engine and take it for a short ride to allow any remaining water to evaporate from the engine, body, and exhaust pipe.

3. Things to Keep in Mind

Important Notes

Washing your motorbike at home is straightforward, but keep the following in mind:

Always use a motorbike-specific wash solution rather than regular detergents like , , or . These can damage the paintwork.
When spraying with water, avoid directing the spray with too much force at electronic parts, the exhaust pipe, brakes, or spark plug. If water gets into these areas, it can be difficult to start the motorbike and may even cause rust or other damage.
Never wash your motorbike when it’s still hot from a recent ride. The temperature difference can cause damage to various components.
After washing, apply lubricant to the chain as some may have been washed away during the cleaning process.
Aim to wash your motorbike every 3-4 weeks to keep it clean and running smoothly.

Now you know how to wash your motorbike like a pro from the comfort of your home, saving time and money. Happy riding!